Vishay BC Components
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
NTCLE100E3224JB0
Lihat Detail Lembar Data

NTCLE100E3224JB0

Product Overview

The NTCLE100E3224JB0 belongs to the category of thermistors and is commonly used for temperature sensing applications. This thermistor exhibits characteristics such as high sensitivity to temperature changes, a small package size, and a wide operating temperature range. It is typically available in bulk packaging with a specified quantity per package.

Specifications

  • Resistance at 25°C: 320 kΩ
  • Tolerance: ±5%
  • Operating Temperature Range: -40°C to 125°C
  • Package Size: 0402 (1005 metric)
  • Power Rating: 50 mW

Detailed Pin Configuration

The NTCLE100E3224JB0 features a two-terminal configuration, with one terminal connected to each end of the thermistor element.

Functional Features

  • High sensitivity to temperature changes
  • Small package size for space-constrained applications
  • Wide operating temperature range allows for versatile use

Advantages and Disadvantages

Advantages

  • High sensitivity enables precise temperature measurements
  • Small package size facilitates integration into compact designs
  • Wide operating temperature range enhances versatility

Disadvantages

  • Limited tolerance may require tighter control in some applications
  • Sensitivity to environmental factors may impact accuracy in certain conditions

Working Principles

The NTCLE100E3224JB0 operates based on the principle of negative temperature coefficient, where its resistance decreases as the temperature increases. This characteristic makes it suitable for temperature measurement and compensation applications.

Detailed Application Field Plans

This thermistor is commonly used in various temperature sensing applications, including: - HVAC systems - Automotive electronics - Consumer appliances - Industrial equipment

Detailed and Complete Alternative Models

  • NTCLE100E3103JB0: Similar characteristics with a different resistance value
  • NTCLE100E3473JB0: Higher resistance and tighter tolerance for specific requirements
  • NTCLE100E3333JB0: Lower resistance with similar operating characteristics

In conclusion, the NTCLE100E3224JB0 thermistor offers high sensitivity and a wide operating temperature range, making it suitable for diverse temperature sensing applications across different industries.

[Word count: 298]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan NTCLE100E3224JB0 dalam solusi teknis

  1. What is the NTCLE100E3224JB0?

    • The NTCLE100E3224JB0 is a thermistor, specifically an NTC (Negative Temperature Coefficient) thermistor, which means its resistance decreases as temperature increases.

  2. What is the typical application of NTCLE100E3224JB0?

    • The NTCLE100E3224JB0 is commonly used for temperature sensing and compensation in various electronic devices and systems, such as power supplies, battery chargers, and HVAC systems.

  3. What is the resistance value of NTCLE100E3224JB0 at room temperature?

    • The resistance of NTCLE100E3224JB0 at room temperature (25°C) is typically 220 kΩ.

  4. How does NTCLE100E3224JB0 respond to changes in temperature?

    • As the temperature increases, the resistance of NTCLE100E3224JB0 decreases exponentially, allowing it to accurately sense and respond to temperature changes.

  5. What is the temperature range for NTCLE100E3224JB0?

    • The NTCLE100E3224JB0 has a wide operating temperature range, typically from -40°C to 125°C, making it suitable for various environmental conditions.

  6. Can NTCLE100E3224JB0 be used for over-temperature protection?

    • Yes, NTCLE100E3224JB0 can be utilized for over-temperature protection by integrating it into circuits that trigger safety measures when the temperature exceeds a certain threshold.

  7. How does NTCLE100E3224JB0 compare to other thermistors?

    • NTCLE100E3224JB0 offers high accuracy, stability, and reliability, making it a popular choice for temperature sensing applications compared to other thermistors.

  8. What are the key considerations for designing with NTCLE100E3224JB0?

    • Designers should consider the self-heating effect, calibration, and proper signal conditioning to ensure accurate temperature measurements and reliable performance.

  9. Can NTCLE100E3224JB0 be used in moisture-prone environments?

    • While NTCLE100E3224JB0 is not designed for direct exposure to moisture, it can be encapsulated or protected to make it suitable for use in such environments.

  10. Are there any specific soldering or handling precautions for NTCLE100E3224JB0?

    • It is important to follow the manufacturer's guidelines for soldering and handling to prevent damage to the thermistor and ensure consistent performance in technical solutions.