Texas Instruments
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SN74CBT16811CDGGR
Lihat Detail Lembar Data

SN74CBT16811CDGGR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Multiplexer/Demultiplexer
  • Characteristics: High-speed, low-power, bidirectional switching capabilities
  • Package: 56-pin VQFN package
  • Essence: Efficiently routes digital signals in various applications
  • Packaging/Quantity: Tape and reel packaging, 2500 units per reel

Specifications

  • Number of Channels: 24
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Supply Voltage Range: 1.65V to 3.6V
  • Switching Speed: <10ns

Detailed Pin Configuration

The SN74CBT16811CDGGR has a total of 56 pins. The pin configuration is as follows:

  1. A0
  2. A1
  3. A2
  4. A3
  5. A4
  6. A5
  7. A6
  8. A7
  9. A8
  10. A9
  11. A10
  12. A11
  13. A12
  14. A13
  15. A14
  16. A15
  17. A16
  18. A17
  19. A18
  20. A19
  21. A20
  22. A21
  23. A22
  24. OE#
  25. B0
  26. B1
  27. B2
  28. B3
  29. B4
  30. B5
  31. B6
  32. B7
  33. B8
  34. B9
  35. B10
  36. B11
  37. B12
  38. B13
  39. B14
  40. B15
  41. B16
  42. B17
  43. B18
  44. B19
  45. B20
  46. B21
  47. B22
  48. B23
  49. GND
  50. VCC
  51. S0
  52. S1
  53. S2
  54. S3
  55. S4
  56. S5

Functional Features

  • Bidirectional switching: Allows signals to be routed in both directions
  • High-speed operation: Switching speed of less than 10ns ensures efficient signal transmission
  • Low-power consumption: Operates at low voltage and consumes minimal power
  • Wide input/output voltage range: Supports a wide range of digital signal levels
  • Multiple channels: Provides 24 channels for versatile signal routing

Advantages and Disadvantages

Advantages

  • Fast switching speed enables high-speed data transmission
  • Low-power consumption prolongs battery life in portable devices
  • Wide input/output voltage range allows compatibility with various systems
  • Multiple channels provide flexibility in signal routing

Disadvantages

  • Limited number of channels may not be suitable for applications requiring a higher channel count
  • Requires careful handling due to its small package size

Working Principles

The SN74CBT16811CDGGR is a digital multiplexer/demultiplexer IC that operates by selectively connecting one of the 24 input channels to the output channel based on the control inputs. It uses CMOS technology to achieve high-speed, bidirectional signal routing. The IC is designed to operate within a specific voltage range and can handle a wide range of digital signal levels.

Detailed Application Field Plans

The SN74CBT16811CDGGR is widely used in various applications, including:

  1. Data communication systems
  2. Networking equipment
  3. Test and measurement instruments
  4. Industrial automation systems
  5. Consumer electronics

In data communication systems, the IC is used for signal routing between different components, such as switches and routers. In networking equipment, it enables efficient data transmission between devices. Test and measurement instruments utilize the IC for signal multiplexing/demultiplexing purposes. Industrial automation systems benefit from its ability to route digital signals in control circuits. Lastly, consumer electronics applications include audio/video signal routing and data switching.

Detailed and Complete Alternative Models

  1. SN74CBT16211CDGGR: 16-channel digital multiplexer/demultiplexer IC
  2. SN74CBT3257CDGGR: Quad 2-channel analog switch/multiplexer IC
  3. SN74CBT3384ADGVR: 10-bit bus switch IC with level shifting capabilities
  4. SN74CBT3245APW: Octal bus transceiver and register IC
  5. SN74CBT3125PWR: Quad FET bus switch IC

These alternative models offer similar functionality and can be considered based

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SN74CBT16811CDGGR dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SN74CBT16811CDGGR:

  1. Q: What is SN74CBT16811CDGGR? A: SN74CBT16811CDGGR is a multiplexer/demultiplexer integrated circuit (IC) that allows for bidirectional level shifting between different voltage domains.

  2. Q: What is the operating voltage range of SN74CBT16811CDGGR? A: SN74CBT16811CDGGR operates within a voltage range of 1.65V to 3.6V.

  3. Q: How many channels does SN74CBT16811CDGGR have? A: SN74CBT16811CDGGR has 16 channels, allowing for simultaneous bidirectional communication between multiple voltage domains.

  4. Q: What is the maximum data rate supported by SN74CBT16811CDGGR? A: SN74CBT16811CDGGR supports a maximum data rate of 100 Mbps.

  5. Q: Can SN74CBT16811CDGGR be used as a level shifter? A: Yes, SN74CBT16811CDGGR can be used as a bidirectional level shifter, enabling communication between devices operating at different voltage levels.

  6. Q: Is SN74CBT16811CDGGR suitable for I2C applications? A: Yes, SN74CBT16811CDGGR can be used in I2C applications to enable communication between devices with different voltage levels.

  7. Q: Does SN74CBT16811CDGGR require external pull-up resistors for I2C applications? A: Yes, external pull-up resistors are required when using SN74CBT16811CDGGR in I2C applications.

  8. Q: Can SN74CBT16811CDGGR be used for level translation in UART applications? A: Yes, SN74CBT16811CDGGR can be used for level translation in UART applications to enable communication between devices with different voltage levels.

  9. Q: What is the power supply voltage required for SN74CBT16811CDGGR? A: SN74CBT16811CDGGR requires a power supply voltage of 1.65V to 3.6V.

  10. Q: Is SN74CBT16811CDGGR available in surface mount package? A: Yes, SN74CBT16811CDGGR is available in a surface mount package (e.g., TSSOP-56) for easy integration into PCB designs.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information.