CLVC1G125IDCKREP

Product Overview

• Category: Integrated Circuit (IC)
• Use: Logic Level Shifter
• Characteristics: Single Gate, Non-Inverting, 3-State Output
• Package: SC-70-5
• Essence: This IC is designed to shift logic levels between different voltage domains in electronic circuits.
• Packaging/Quantity: Available in tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

• Supply Voltage Range: 1.65V to 5.5V
• High-Level Input Voltage: 2.3V to VCC
• Low-Level Input Voltage: GND to 0.8V
• High-Level Output Voltage: 2.4V to VCC
• Low-Level Output Voltage: GND to 0.4V
• Maximum Propagation Delay Time: 6.5ns
• Maximum Operating Frequency: 200MHz

Detailed Pin Configuration

The CLVC1G125IDCKREP has the following pin configuration:

• Pin 1: A - Input
• Pin 2: OE - Output Enable
• Pin 3: Y - Output
• Pin 4: VCC - Power Supply
• Pin 5: GND - Ground

Functional Features

• Logic Level Shifting: The CLVC1G125IDCKREP allows for seamless shifting of logic levels between different voltage domains, enabling communication between devices operating at different voltage levels.
• Non-Inverting Operation: The input signal is not inverted at the output, maintaining the same logic state.
• 3-State Output: The output can be put into a high-impedance state using the OE pin, allowing multiple devices to share a common bus.

Advantages and Disadvantages

Advantages: - Wide supply voltage range allows compatibility with various systems. - Fast propagation delay time enables high-speed data transmission. - Small package size (SC-70-5) saves board space.

Disadvantages: - Limited output current capability may restrict use in certain applications. - Single gate design may not be suitable for complex logic operations.

Working Principles

The CLVC1G125IDCKREP utilizes a combination of MOSFETs and CMOS technology to achieve logic level shifting. The input signal is passed through a level shifter circuit, which adjusts the voltage levels according to the specified supply voltage range. The non-inverting characteristic ensures that the output signal maintains the same logic state as the input.

Detailed Application Field Plans

The CLVC1G125IDCKREP can be used in various applications, including:

1. Battery-Powered Devices: It allows for communication between low-voltage microcontrollers and higher voltage peripherals, extending battery life.
2. Sensor Interfaces: It facilitates interfacing between sensors operating at different voltage levels and microcontrollers or processing units.
3. Communication Systems: It enables level shifting between different communication protocols, such as UART, I2C, SPI, etc., ensuring compatibility between devices.
4. Industrial Control Systems: It can be utilized in control systems where different components operate at different voltage levels, enabling seamless integration.

Detailed and Complete Alternative Models

1. SN74LVC1G125DBVR: Single Gate Non-Inverting 3-State Output Logic Level Shifter, SOT-23-5 package.
2. NC7SZ125P5X: Single Gate Non-Inverting 3-State Output Logic Level Shifter, SC-70-5 package.
3. MC74VHC1GT125DF1G: Single Gate Non-Inverting 3-State Output Logic Level Shifter, SOT-353 package.

These alternative models provide similar functionality and can be considered as alternatives to the CLVC1G125IDCKREP.

Word count: 443 words