The CD74HCT574QM96G4Q1 has a total of 96 pins. The pin configuration is as follows:
The CD74HCT574QM96G4Q1 is based on high-speed CMOS technology. It consists of eight D-type flip-flops that store and transfer digital data. The flip-flops are edge-triggered, meaning they respond to changes in the clock input signal. When the clock signal transitions from low to high (or high to low, depending on the configuration
Sure! Here are 10 common questions and answers related to the application of CD74HCT574QM96G4Q1 in technical solutions:
1. What is CD74HCT574QM96G4Q1? CD74HCT574QM96G4Q1 is a high-speed CMOS octal D-type flip-flop with 3-state outputs. It is commonly used in digital systems for data storage and transfer.
2. What is the operating voltage range of CD74HCT574QM96G4Q1? The operating voltage range of CD74HCT574QM96G4Q1 is typically between 4.5V and 5.5V.
3. What is the maximum clock frequency supported by CD74HCT574QM96G4Q1? CD74HCT574QM96G4Q1 can support clock frequencies up to 25 MHz.
4. How many flip-flops are there in CD74HCT574QM96G4Q1? CD74HCT574QM96G4Q1 consists of 8 flip-flops, making it an octal (8-bit) device.
5. What are the 3-state outputs in CD74HCT574QM96G4Q1 used for? The 3-state outputs in CD74HCT574QM96G4Q1 allow multiple devices to be connected together without causing conflicts or bus contention.
6. Can CD74HCT574QM96G4Q1 be used in both parallel and serial data transfer applications? Yes, CD74HCT574QM96G4Q1 can be used in both parallel and serial data transfer applications, depending on how it is configured.
7. What is the typical propagation delay of CD74HCT574QM96G4Q1? The typical propagation delay of CD74HCT574QM96G4Q1 is around 11 ns.
8. Is CD74HCT574QM96G4Q1 compatible with TTL logic levels? Yes, CD74HCT574QM96G4Q1 is compatible with TTL logic levels, making it suitable for interfacing with other TTL devices.
9. Can CD74HCT574QM96G4Q1 be used in automotive applications? Yes, CD74HCT574QM96G4Q1 is qualified for automotive applications and can operate in harsh environments.
10. What are some common applications of CD74HCT574QM96G4Q1? CD74HCT574QM96G4Q1 is commonly used in microcontrollers, data storage systems, address decoding, bus drivers, and general-purpose digital logic circuits.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for CD74HCT574QM96G4Q1.