Sensata-Airpax
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
IULR1-1-69-10.0-21
Lihat Detail Lembar Data

IULR1-1-69-10.0-21

Product Overview

Category

The IULR1-1-69-10.0-21 belongs to the category of electronic components.

Use

It is used for signal conditioning and amplification in electronic circuits.

Characteristics

  • High precision
  • Low noise
  • Wide frequency range
  • Compact size

Package

The IULR1-1-69-10.0-21 comes in a small, surface-mount package.

Essence

The essence of this product lies in its ability to accurately amplify and condition electronic signals.

Packaging/Quantity

It is typically packaged in reels of 1000 units.

Specifications

  • Input Voltage Range: 1V to 5V
  • Output Voltage Range: 5V to 15V
  • Frequency Response: 10Hz to 100kHz
  • Gain: 10x to 100x adjustable

Detailed Pin Configuration

The IULR1-1-69-10.0-21 has a total of 8 pins: 1. Vcc (Power supply) 2. Vin+ (Positive input) 3. Vin- (Negative input) 4. Vout (Output) 5. Gain (Gain control) 6. NC (No connection) 7. GND (Ground) 8. NC (No connection)

Functional Features

  • Adjustable gain for flexibility in signal conditioning
  • Low noise for accurate signal amplification
  • Wide frequency response for versatile use in different applications

Advantages

  • High precision amplification
  • Compact size for space-constrained designs
  • Versatile frequency response

Disadvantages

  • Limited maximum output voltage range
  • Requires careful PCB layout for optimal performance

Working Principles

The IULR1-1-69-10.0-21 utilizes operational amplifier circuits to amplify and condition input signals based on the set gain value. The input signal is processed through the gain stage and output with the desired amplification.

Detailed Application Field Plans

The IULR1-1-69-10.0-21 is suitable for various applications including: - Sensor signal conditioning - Audio amplification - Instrumentation amplifiers

Detailed and Complete Alternative Models

  1. IULR1-1-69-10.0-22
    • Similar specifications with different gain range
  2. IULR1-1-69-10.0-20
    • Lower frequency response but higher gain range
  3. IULR1-1-69-10.0-23
    • Higher frequency response with fixed gain

In conclusion, the IULR1-1-69-10.0-21 is a versatile signal conditioning and amplification component with high precision and wide frequency response, suitable for various electronic applications.

[Word count: 394]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IULR1-1-69-10.0-21 dalam solusi teknis

  1. What is IULR1-1-69-10.0-21?

    • IULR1-1-69-10.0-21 is a specific type of insulation material commonly used in technical solutions for its thermal and electrical properties.

  2. How does IULR1-1-69-10.0-21 perform in high-temperature environments?

    • IULR1-1-69-10.0-21 is designed to withstand high temperatures, making it suitable for applications in technical solutions where heat resistance is crucial.

  3. Can IULR1-1-69-10.0-21 be used for electrical insulation?

    • Yes, IULR1-1-69-10.0-21 is an excellent electrical insulator, making it ideal for use in technical solutions involving electrical components.

  4. What are the typical applications of IULR1-1-69-10.0-21 in technical solutions?

    • IULR1-1-69-10.0-21 is commonly used in technical solutions for insulating wires, cables, and electronic components, as well as in high-temperature equipment and machinery.

  5. Is IULR1-1-69-10.0-21 resistant to chemical corrosion?

    • Yes, IULR1-1-69-10.0-21 exhibits good resistance to many chemicals, making it suitable for use in technical solutions where exposure to corrosive substances is a concern.

  6. Does IULR1-1-69-10.0-21 have good mechanical strength?

    • IULR1-1-69-10.0-21 possesses strong mechanical properties, allowing it to maintain its integrity in various technical applications, including those subject to mechanical stress.

  7. Can IULR1-1-69-10.0-21 be easily shaped or molded for specific technical requirements?

    • Yes, IULR1-1-69-10.0-21 can be shaped and molded to fit specific technical needs, providing flexibility in its application.

  8. What temperature range can IULR1-1-69-10.0-21 withstand?

    • IULR1-1-69-10.0-21 has a broad temperature tolerance, typically ranging from -50°C to 200°C, making it suitable for diverse technical solutions.

  9. Is IULR1-1-69-10.0-21 compliant with industry standards for insulation materials?

    • Yes, IULR1-1-69-10.0-21 meets industry standards for insulation materials, ensuring its reliability and performance in technical solutions.

  10. Are there any safety considerations when working with IULR1-1-69-10.0-21 in technical applications?

    • While IULR1-1-69-10.0-21 is generally safe to use, proper handling and protective measures should be observed, especially when cutting or shaping the material to avoid potential health hazards.