Sensata-Airpax
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
IEG6-1REG4-52-2.50-01-V
Lihat Detail Lembar Data

IEG6-1REG4-52-2.50-01-V

Product Overview

Category

The IEG6-1REG4-52-2.50-01-V belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

  • Regulates voltage to a precise level
  • Compact design
  • High efficiency
  • Wide input voltage range
  • Overcurrent protection

Package

The IEG6-1REG4-52-2.50-01-V comes in a small, surface-mount package.

Essence

The essence of this product lies in its ability to ensure stable voltage supply to sensitive electronic components.

Packaging/Quantity

It is typically packaged in reels of 2500 units.

Specifications

  • Input Voltage Range: 4V to 36V
  • Output Voltage: 2.5V
  • Maximum Output Current: 1A
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: SOT-223

Detailed Pin Configuration

The IEG6-1REG4-52-2.50-01-V has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. VOUT (Output Voltage)

Functional Features

  • Precise voltage regulation
  • Thermal shutdown protection
  • Short-circuit protection
  • Low dropout voltage

Advantages and Disadvantages

Advantages

  • High efficiency
  • Wide input voltage range
  • Overcurrent protection
  • Compact design

Disadvantages

  • Limited maximum output current
  • Sensitive to excessive heat

Working Principles

The IEG6-1REG4-52-2.50-01-V uses feedback control to maintain a constant output voltage despite variations in input voltage and load conditions. It adjusts the resistance to ensure the desired output voltage is maintained.

Detailed Application Field Plans

This voltage regulator is commonly used in various electronic devices such as mobile phones, portable media players, and automotive electronics. Its stable output voltage makes it suitable for applications requiring precise power supply.

Detailed and Complete Alternative Models

Some alternative models to the IEG6-1REG4-52-2.50-01-V include the LM317, LM7805, and LM1117. These models offer similar voltage regulation capabilities and are widely used in electronic circuits.

This comprehensive entry provides detailed information about the IEG6-1REG4-52-2.50-01-V, covering its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IEG6-1REG4-52-2.50-01-V dalam solusi teknis

  1. What is IEG6-1REG4-52-2.50-01-V?

    • IEG6-1REG4-52-2.50-01-V is a specific type of component or device used in technical solutions, typically for a particular purpose such as voltage regulation or power management.

  2. How does IEG6-1REG4-52-2.50-01-V work?

    • IEG6-1REG4-52-2.50-01-V works by regulating the voltage within a specified range, ensuring that the electrical system operates within safe and optimal parameters.

  3. What are the typical applications of IEG6-1REG4-52-2.50-01-V?

    • IEG6-1REG4-52-2.50-01-V is commonly used in power supplies, industrial automation, automotive electronics, and other technical systems where precise voltage regulation is required.

  4. What are the key features of IEG6-1REG4-52-2.50-01-V?

    • The key features of IEG6-1REG4-52-2.50-01-V may include high precision, wide input voltage range, low dropout voltage, thermal shutdown protection, and adjustable output voltage.

  5. How do I select the right IEG6-1REG4-52-2.50-01-V for my application?

    • Selecting the right IEG6-1REG4-52-2.50-01-V involves considering factors such as input voltage requirements, output voltage range, current capacity, and environmental conditions.

  6. What are the potential challenges when using IEG6-1REG4-52-2.50-01-V?

    • Challenges may include thermal management, voltage spikes, electromagnetic interference, and compatibility with other components in the system.

  7. Are there any recommended best practices for integrating IEG6-1REG4-52-2.50-01-V into a technical solution?

    • Best practices may include proper PCB layout, adequate heat sinking, input/output filtering, and adherence to manufacturer's guidelines for usage.

  8. What are the advantages of using IEG6-1REG4-52-2.50-01-V in technical solutions?

    • Advantages may include improved system stability, enhanced performance, protection against voltage fluctuations, and efficient power utilization.

  9. Can I use multiple IEG6-1REG4-52-2.50-01-V devices in parallel for higher current applications?

    • Yes, it is possible to parallel multiple IEG6-1REG4-52-2.50-01-V devices to achieve higher current capacity, but careful attention must be paid to current sharing and stability.

  10. Where can I find detailed technical specifications and application notes for IEG6-1REG4-52-2.50-01-V?

    • Detailed technical specifications and application notes for IEG6-1REG4-52-2.50-01-V can typically be found on the manufacturer's website or in the product datasheet.