Renesas Electronics America
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
D73042FI16V

D73042FI16V

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact size, voltage regulation
  • Package: 16-pin Dual In-Line Package (DIP)
  • Essence: Voltage Regulator IC
  • Packaging/Quantity: Tray packaging, 100 units per tray

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 1.2V to 18V
  • Output Current: Up to 3A
  • Operating Temperature Range: -40°C to +85°C
  • Quiescent Current: 50µA (typical)

Detailed Pin Configuration

The D73042FI16V IC has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. COMP: Compensation pin
  7. SS: Soft-start pin
  8. PGND: Power ground pin
  9. BST: Bootstrap pin
  10. SW: Switch pin
  11. AGND: Analog ground pin
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. VCC: Supply voltage pin

Functional Features

  • High efficiency power conversion
  • Wide input voltage range for versatile applications
  • Adjustable output voltage through feedback pin
  • Overcurrent and thermal protection
  • Soft-start function for controlled startup
  • Stable voltage regulation under varying load conditions

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Compact size allows for space-saving designs - Wide input voltage range enables compatibility with various power sources - Adjustable output voltage provides flexibility for different applications - Overcurrent and thermal protection ensure safe operation

Disadvantages: - Limited maximum output current of 3A may not be suitable for high-power applications - Operating temperature range may restrict usage in extreme environments

Working Principles

The D73042FI16V is a voltage regulator IC that converts an input voltage within the range of 4.5V to 24V into a regulated output voltage between 1.2V and 18V. It utilizes internal circuitry to maintain a stable output voltage despite variations in the input voltage and load conditions. The feedback pin (FB) allows the user to adjust the desired output voltage by connecting external resistors. The IC also incorporates overcurrent and thermal protection mechanisms to safeguard against potential damage.

Detailed Application Field Plans

The D73042FI16V is commonly used in various applications, including but not limited to:

  1. Power supplies for consumer electronics
  2. Battery charging circuits
  3. Automotive electronics
  4. Industrial control systems
  5. LED lighting systems
  6. Telecommunications equipment

Detailed and Complete Alternative Models

  1. D73041FI16V: Similar specifications and pin configuration, suitable for lower current applications.
  2. D73043FI16V: Higher maximum output current of 5A, suitable for more demanding power requirements.
  3. D73044FI16V: Enhanced thermal performance, suitable for high-temperature environments.

Note: Please refer to the manufacturer's datasheet for complete details on alternative models.

Word count: 410 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan D73042FI16V dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of D73042FI16V in technical solutions:

  1. Q: What is D73042FI16V? A: D73042FI16V is a specific model or type of component used in technical solutions, typically in electronic circuits.

  2. Q: What is the purpose of D73042FI16V? A: The purpose of D73042FI16V is to perform a specific function within an electronic circuit, such as voltage regulation or signal amplification.

  3. Q: How does D73042FI16V work? A: D73042FI16V works by receiving an input signal or voltage and processing it according to its design specifications to produce the desired output.

  4. Q: What are the key features of D73042FI16V? A: The key features of D73042FI16V may include its voltage rating, current capacity, frequency response, temperature range, and physical dimensions.

  5. Q: Can D73042FI16V be used in high-power applications? A: It depends on the specific specifications of D73042FI16V. Some models may be suitable for high-power applications, while others may have limitations.

  6. Q: Is D73042FI16V compatible with other components or systems? A: D73042FI16V's compatibility depends on the requirements and specifications of the other components or systems it will be used with. It is important to check compatibility before integration.

  7. Q: Are there any recommended operating conditions for D73042FI16V? A: Yes, D73042FI16V typically has recommended operating conditions regarding voltage supply, temperature range, and other parameters. These should be followed for optimal performance.

  8. Q: Can D73042FI16V be used in both AC and DC circuits? A: It depends on the specific design of D73042FI16V. Some models may be suitable for both AC and DC circuits, while others may be designed for one or the other.

  9. Q: Are there any known limitations or precautions when using D73042FI16V? A: Yes, it is important to consider factors such as maximum voltage ratings, current limitations, heat dissipation, and protection measures to ensure safe and reliable operation.

  10. Q: Where can I find more information about D73042FI16V? A: You can refer to the datasheet, technical documentation, or manufacturer's website for detailed information about D73042FI16V, including its specifications, application notes, and usage guidelines.

Please note that the specific details provided in the answers may vary depending on the actual characteristics and specifications of D73042FI16V.