ON Semiconductor
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
DM74ALS125MX
Lihat Detail Lembar Data

DM74ALS125MX

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Buffer/Driver
  • Characteristics: High-speed, TTL-compatible, quad 3-state buffer
  • Package: 14-pin DIP (Dual In-line Package)
  • Essence: Buffering and driving signals in digital circuits
  • Packaging/Quantity: Typically sold in reels of 250 or 1000 units

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay Time: 9ns (typical)
  • Output Current: ±24mA
  • Input Capacitance: 3pF
  • Output Capacitance: 15pF

Detailed Pin Configuration

  1. GND (Ground)
  2. A1 (Input A1)
  3. Y1 (Output Y1)
  4. A2 (Input A2)
  5. Y2 (Output Y2)
  6. Enable (Enable Input)
  7. Y3 (Output Y3)
  8. A3 (Input A3)
  9. Y4 (Output Y4)
  10. VCC (Supply Voltage)
  11. B1 (Input B1)
  12. Y5 (Output Y5)
  13. B2 (Input B2)
  14. Y6 (Output Y6)

Functional Features

  • Quad 3-state buffer with independent control for each buffer
  • High-speed operation suitable for demanding applications
  • TTL-compatible inputs and outputs for easy integration into existing systems
  • 3-state outputs allow multiple devices to share a common bus without interference
  • Low power consumption

Advantages

  • High-speed operation enables efficient signal buffering and driving
  • TTL compatibility ensures easy integration with existing digital circuits
  • 3-state outputs facilitate bus sharing and reduce system complexity
  • Low power consumption helps conserve energy in battery-powered applications

Disadvantages

  • Limited output current may not be suitable for driving heavy loads
  • Restricted voltage range (4.5V to 5.5V) may limit compatibility with certain systems
  • Propagation delay time of 9ns may introduce timing issues in high-frequency applications

Working Principles

The DM74ALS125MX is a quad 3-state buffer that operates by receiving input signals on the A1, A2, A3, and B inputs. The Enable input controls the output state of each buffer. When the Enable input is low, the outputs (Y1-Y6) are in a high-impedance state, allowing other devices to drive the shared bus. When the Enable input is high, the input signals are buffered and amplified to the corresponding outputs.

Detailed Application Field Plans

The DM74ALS125MX is commonly used in various digital systems where signal buffering and driving are required. Some typical application fields include: - Microprocessor-based systems - Data communication networks - Industrial automation - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

  • SN74ALS125N: Similar quad 3-state buffer from Texas Instruments
  • MC74ALS125N: Quad 3-state buffer from ON Semiconductor
  • CD74ACT125M: Quad 3-state buffer with Schmitt-trigger inputs from Texas Instruments
  • 74HC125D: Quad 3-state buffer with CMOS inputs from NXP Semiconductors

(Note: This list is not exhaustive and there are several other alternative models available in the market.)

Word count: 389 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan DM74ALS125MX dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of DM74ALS125MX in technical solutions:

  1. Q: What is DM74ALS125MX? A: DM74ALS125MX is a quad buffer/line driver IC (integrated circuit) that provides high-speed, non-inverting buffering or line driving capabilities.

  2. Q: What is the voltage supply range for DM74ALS125MX? A: The voltage supply range for DM74ALS125MX is typically between 4.5V and 5.5V.

  3. Q: What is the maximum operating frequency of DM74ALS125MX? A: The maximum operating frequency of DM74ALS125MX is typically around 100 MHz.

  4. Q: Can DM74ALS125MX be used for level shifting applications? A: Yes, DM74ALS125MX can be used for level shifting applications as it supports both TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor) logic levels.

  5. Q: How many buffers/line drivers are there in DM74ALS125MX? A: DM74ALS125MX consists of four independent buffers/line drivers.

  6. Q: What is the output current capability of DM74ALS125MX? A: The output current capability of DM74ALS125MX is typically around 24 mA.

  7. Q: Can DM74ALS125MX be used for bidirectional data transfer? A: No, DM74ALS125MX is unidirectional and can only be used for one-way data transfer.

  8. Q: What is the input voltage range for DM74ALS125MX? A: The input voltage range for DM74ALS125MX is typically between 0V and Vcc (the supply voltage).

  9. Q: Is DM74ALS125MX compatible with other TTL or CMOS devices? A: Yes, DM74ALS125MX is compatible with other TTL and CMOS devices as it has standard logic level compatibility.

  10. Q: What are some common applications of DM74ALS125MX? A: Some common applications of DM74ALS125MX include bus driving, memory interfacing, clock distribution, and general-purpose buffering in digital systems.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for DM74ALS125MX.