Microsemi Corporation
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MXLP6KE51A
Lihat Detail Lembar Data

MXLP6KE51A

Product Overview

Category

MXLP6KE51A belongs to the category of transient voltage suppressor (TVS) diodes.

Use

It is used to protect sensitive electronic components from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events.

Characteristics

  • Fast response time
  • Low clamping voltage
  • High surge current capability

Package

MXLP6KE51A is typically available in a DO-15 package.

Essence

The essence of MXLP6KE51A lies in its ability to divert excessive current away from sensitive components, thereby safeguarding them from damage.

Packaging/Quantity

MXLP6KE51A is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Peak Pulse Power: 600W
  • Standoff Voltage: 43.6V
  • Breakdown Voltage: 48.4V
  • Maximum Clamping Voltage: 69.4V
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

MXLP6KE51A typically consists of two pins, with the anode connected to the positive side and the cathode connected to the negative side of the circuit.

Functional Features

  • Transient voltage suppression
  • Reverse avalanche breakdown protection
  • Fast response to transient events

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • Wide operating temperature range

Disadvantages

  • Limited surge current handling capability compared to higher power TVS diodes
  • Higher clamping voltage compared to some alternative models

Working Principles

When a transient voltage event occurs, MXLP6KE51A conducts current to divert the excess energy away from the protected circuit. This is achieved through the reverse avalanche breakdown mechanism, which allows the diode to rapidly switch into a low impedance state.

Detailed Application Field Plans

MXLP6KE51A is commonly used in various applications including: - Telecommunication equipment - Industrial control systems - Automotive electronics - Power supplies - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to MXLP6KE51A include: - P6KE51A - 1.5KE51A - SA5.0A

In summary, MXLP6KE51A is a transient voltage suppressor diode designed to provide effective protection against voltage transients in a wide range of electronic applications.

Word count: 386

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MXLP6KE51A dalam solusi teknis

  1. What is MXLP6KE51A?

    • MXLP6KE51A is a transient voltage suppressor diode designed to protect sensitive electronics from voltage spikes and transients.

  2. What is the maximum clamping voltage of MXLP6KE51A?

    • The maximum clamping voltage of MXLP6KE51A is 82.4V at 5A.

  3. What is the peak pulse power dissipation of MXLP6KE51A?

    • The peak pulse power dissipation of MXLP6KE51A is 600W for an 8/20µs waveform.

  4. What are the typical applications of MXLP6KE51A?

    • MXLP6KE51A is commonly used in surge protection for telecommunications equipment, industrial controls, consumer electronics, and automotive systems.

  5. What is the operating temperature range of MXLP6KE51A?

    • MXLP6KE51A has an operating temperature range of -55°C to 175°C.

  6. What is the reverse stand-off voltage of MXLP6KE51A?

    • The reverse stand-off voltage of MXLP6KE51A is 43.6V.

  7. Does MXLP6KE51A meet any specific industry standards?

    • MXLP6KE51A is compliant with RoHS and REACH directives.

  8. Can MXLP6KE51A be used for ESD protection?

    • Yes, MXLP6KE51A can be used for electrostatic discharge (ESD) protection in various electronic circuits.

  9. What package type is MXLP6KE51A available in?

    • MXLP6KE51A is available in a DO-15 package.

  10. Is MXLP6KE51A suitable for high-speed data lines?

    • Yes, MXLP6KE51A is suitable for protecting high-speed data lines such as USB, Ethernet, and HDMI interfaces.