Microsemi Corporation
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
JANTX2N3507
Lihat Detail Lembar Data

JANTX2N3507

Product Overview

Category

The JANTX2N3507 belongs to the category of high-reliability, military-grade transistors.

Use

It is commonly used in applications where high performance and reliability are critical, such as in military and aerospace systems.

Characteristics

  • High reliability
  • Military-grade specifications
  • High-performance characteristics

Package

The JANTX2N3507 is typically available in a metal can package, providing robust protection for the transistor.

Essence

The essence of the JANTX2N3507 lies in its ability to withstand harsh environmental conditions and maintain consistent performance.

Packaging/Quantity

It is usually packaged in tubes or trays, with quantities varying based on the supplier and customer requirements.

Specifications

  • Maximum Power Dissipation: 1.8 Watts
  • Collector-Emitter Voltage: 50 Volts
  • Collector Current: 0.5 Amperes
  • Transition Frequency: 100 MHz
  • Operating Temperature Range: -65°C to +200°C

Detailed Pin Configuration

The JANTX2N3507 has a standard three-pin configuration: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

The JANTX2N3507 offers the following functional features: - High voltage and current capability - Low noise and distortion - High frequency performance

Advantages and Disadvantages

Advantages

  • High reliability and ruggedness
  • Suitable for extreme environmental conditions
  • Consistent performance over a wide temperature range

Disadvantages

  • Higher cost compared to commercial-grade transistors
  • Limited availability due to its specialized nature

Working Principles

The JANTX2N3507 operates based on the principles of bipolar junction transistors, utilizing the control of current flow for amplification and switching applications.

Detailed Application Field Plans

The JANTX2N3507 is commonly used in the following application fields: - Military and aerospace electronics - Communication systems - Industrial control systems - Power supply and conversion

Detailed and Complete Alternative Models

Some alternative models to the JANTX2N3507 include: - JANTXV2N3507 - JANHC2N3507 - JANSR2N3507

In conclusion, the JANTX2N3507 is a high-reliability transistor designed for demanding applications in military, aerospace, and other critical systems. Its robust construction, high-performance characteristics, and ability to operate in extreme conditions make it a preferred choice for applications where reliability is paramount. While it may have a higher cost and limited availability, its unique features and performance justify its use in critical electronic systems.

Word Count: 410

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan JANTX2N3507 dalam solusi teknis

  1. What is the JANTX2N3507 transistor used for?

    • The JANTX2N3507 is a high-reliability, high-performance NPN bipolar junction transistor commonly used in military and aerospace applications.

  2. What are the key specifications of the JANTX2N3507 transistor?

    • The JANTX2N3507 transistor typically has a maximum collector current of 600mA, a maximum collector-emitter voltage of 30V, and a power dissipation of 625mW.

  3. What are the typical applications of the JANTX2N3507 transistor?

    • The JANTX2N3507 transistor is often used in RF amplifiers, oscillators, mixers, and other high-frequency applications due to its high reliability and performance.

  4. What are the temperature ratings for the JANTX2N3507 transistor?

    • The JANTX2N3507 transistor is typically rated for operation over a temperature range of -65°C to +200°C.

  5. What are the packaging options available for the JANTX2N3507 transistor?

    • The JANTX2N3507 transistor is commonly available in TO-18 metal can packages and surface-mount packages.

  6. What are the key differences between the JANTX2N3507 and commercial-grade transistors?

    • The JANTX2N3507 is designed and tested to meet stringent military and aerospace standards for reliability and performance, making it suitable for harsh environments and critical applications.

  7. Can the JANTX2N3507 be used in commercial or industrial applications?

    • While the JANTX2N3507 is primarily intended for military and aerospace use, it can also be utilized in certain high-reliability commercial and industrial applications where ruggedness and performance are crucial.

  8. What are the recommended biasing and operating conditions for the JANTX2N3507 transistor?

    • The JANTX2N3507 transistor should be biased and operated within the specified voltage, current, and temperature limits provided in the datasheet to ensure reliable performance.

  9. Are there any known failure modes or reliability issues associated with the JANTX2N3507 transistor?

    • The JANTX2N3507 transistor is designed for high reliability and undergoes rigorous testing to minimize failure rates, but users should still adhere to proper handling and operating procedures to ensure long-term performance.

  10. Where can I find detailed technical documentation and application notes for the JANTX2N3507 transistor?

    • Detailed technical documentation, including datasheets and application notes, for the JANTX2N3507 transistor can be obtained from authorized distributors or the manufacturer's website.