Microsemi Corporation
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
JANTX1N4962C
Lihat Detail Lembar Data

JANTX1N4962C

Product Overview

Category

The JANTX1N4962C belongs to the category of semiconductor diodes.

Use

It is commonly used in electronic circuits for rectification, voltage regulation, and signal demodulation.

Characteristics

  • High reliability
  • Low forward voltage drop
  • Fast switching speed
  • High temperature operation capability

Package

The JANTX1N4962C is typically available in a DO-41 package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) and for regulating voltage in electronic devices.

Packaging/Quantity

It is usually packaged in reels or tubes and is available in various quantities depending on the manufacturer.

Specifications

  • Maximum Forward Voltage: 1.0V
  • Reverse Voltage: 200V
  • Average Rectified Current: 1A
  • Peak Surge Current: 30A
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The JANTX1N4962C has two pins, an anode, and a cathode. The anode is connected to the positive terminal of the circuit, while the cathode is connected to the negative terminal.

Functional Features

  • Efficient rectification of AC to DC
  • Fast response time for switching applications
  • Reliable voltage regulation

Advantages and Disadvantages

Advantages

  • High reliability and durability
  • Low forward voltage drop
  • Fast switching speed

Disadvantages

  • Limited reverse voltage capability compared to some other diode models
  • Relatively higher cost compared to standard diodes

Working Principles

The JANTX1N4962C operates based on the principle of creating a one-way flow of current when forward biased and blocking the flow of current when reverse biased. This allows it to efficiently convert AC to DC and regulate voltage in electronic circuits.

Detailed Application Field Plans

The JANTX1N4962C is widely used in: - Power supply units - Voltage regulators - Signal demodulation circuits - Switching power supplies - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the JANTX1N4962C include: - 1N4004 - 1N5408 - 1N5819 - 1N4148

In conclusion, the JANTX1N4962C is a reliable semiconductor diode with high performance characteristics, making it suitable for a wide range of electronic applications.

[Word count: 366]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan JANTX1N4962C dalam solusi teknis

Sure, here are 10 common questions and answers related to the application of JANTX1N4962C:

  1. What is JANTX1N4962C?

    • JANTX1N4962C is a high-reliability, military-grade silicon power rectifier diode.

  2. What are the key features of JANTX1N4962C?

    • The key features include a high current capability, low forward voltage drop, and rugged construction for high-reliability applications.

  3. What are the typical applications of JANTX1N4962C?

    • It is commonly used in military and aerospace systems, as well as in other high-reliability applications where a rugged and reliable power rectifier is required.

  4. What is the maximum forward current rating of JANTX1N4962C?

    • The maximum forward current rating is typically around 6 amperes.

  5. What is the maximum reverse voltage rating of JANTX1N4962C?

    • The maximum reverse voltage rating is typically around 200 volts.

  6. Is JANTX1N4962C suitable for high-temperature environments?

    • Yes, it is designed to operate reliably at elevated temperatures, making it suitable for high-temperature environments.

  7. Can JANTX1N4962C be used in bridge rectifier configurations?

    • Yes, it can be used in bridge rectifier circuits for converting AC to DC in power supply applications.

  8. Does JANTX1N4962C have any special packaging requirements?

    • It is typically available in industry-standard packages such as DO-203AA (DO-4) or similar rugged packages suitable for high-reliability applications.

  9. What are the reliability specifications of JANTX1N4962C?

    • It meets stringent military and aerospace reliability standards, including temperature cycling, thermal shock, and mechanical shock and vibration.

  10. Where can I find detailed technical specifications for JANTX1N4962C?

    • Detailed technical specifications can be found in the datasheet provided by the manufacturer or distributor of the component.

I hope these questions and answers are helpful! Let me know if you need further assistance.