Microchip Technology
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
PIC24F08KM102-I/ML
Lihat Detail Lembar Data

PIC24F08KM102-I/ML

Product Overview

Category

The PIC24F08KM102-I/ML belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 16-bit architecture
  • Low power consumption
  • Large memory capacity
  • Integrated peripherals for versatile functionality
  • Robust communication interfaces
  • Enhanced security features

Package

The PIC24F08KM102-I/ML is available in a small form factor package, known as ML (QFN).

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of electronic devices and systems.

Packaging/Quantity

The PIC24F08KM102-I/ML is typically packaged in reels or trays, with a quantity of 250 units per reel/tray.

Specifications

  • Microcontroller core: PIC24F
  • CPU speed: Up to 16 MIPS
  • Flash memory: 8 KB
  • RAM: 512 bytes
  • Operating voltage: 2.0V to 3.6V
  • Operating temperature range: -40°C to +85°C
  • Communication interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, up to 16 channels
  • Digital-to-Analog Converter (DAC): 12-bit, up to 2 channels
  • Timers: Multiple timers/counters with various modes
  • PWM outputs: Up to 4 channels
  • Interrupt sources: Multiple external and internal sources

Detailed Pin Configuration

The PIC24F08KM102-I/ML has a total of 28 pins, which are assigned to different functions such as power supply, input/output, communication, and programming. The detailed pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RA0 - General-purpose I/O pin
  4. RA1 - General-purpose I/O pin
  5. RA2 - General-purpose I/O pin
  6. RA3 - General-purpose I/O pin
  7. RA4 - General-purpose I/O pin
  8. RA5 - General-purpose I/O pin
  9. RB0 - General-purpose I/O pin
  10. RB1 - General-purpose I/O pin
  11. RB2 - General-purpose I/O pin
  12. RB3 - General-purpose I/O pin
  13. RB4 - General-purpose I/O pin
  14. RB5 - General-purpose I/O pin
  15. RB6 - General-purpose I/O pin
  16. RB7 - General-purpose I/O pin
  17. RB8 - General-purpose I/O pin
  18. RB9 - General-purpose I/O pin
  19. RB10 - General-purpose I/O pin
  20. RB11 - General-purpose I/O pin
  21. RB12 - General-purpose I/O pin
  22. RB13 - General-purpose I/O pin
  23. RB14 - General-purpose I/O pin
  24. RB15 - General-purpose I/O pin
  25. MCLR - Master Clear (Reset) input
  26. OSC1 - Oscillator input
  27. OSC2 - Oscillator output
  28. VCAP - Capacitor connection for internal voltage regulator

Functional Features

  • High-speed processing capabilities
  • Flexible and versatile I/O options
  • Extensive memory for program storage and data handling
  • Efficient communication interfaces for seamless connectivity
  • Advanced analog-to-digital and digital-to-analog conversion capabilities
  • Timers and PWM outputs for precise timing and control
  • Interrupt handling for real-time event-driven applications
  • Enhanced security features for data protection

Advantages and Disadvantages

Advantages

  • High-performance microcontroller with a 16-bit architecture
  • Low power consumption for energy-efficient applications
  • Ample memory capacity for storing complex programs and data
  • Integrated peripherals reduce the need for external components
  • Robust communication interfaces enable seamless connectivity
  • Enhanced security features protect sensitive information

Disadvantages

  • Limited availability of alternative models with similar specifications
  • Relatively higher cost compared to lower-end microcontrollers
  • Steeper learning curve for beginners due to its advanced features

Working Principles

The PIC24F08KM102-I/ML operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its flash memory, processes data, and controls various peripheral devices connected to it. The microcontroller interacts with the external world through its input/output pins, enabling it to sense and control the surrounding environment.

Detailed Application Field Plans

The PIC24F08KM102-I/ML finds applications in various fields, including but not limited to: 1. Industrial automation 2. Consumer electronics 3. Medical devices 4

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan PIC24F08KM102-I/ML dalam solusi teknis

  1. What is the maximum operating frequency of PIC24F08KM102-I/ML?
    - The maximum operating frequency of PIC24F08KM102-I/ML is 32 MHz.

  2. What are the key features of PIC24F08KM102-I/ML?
    - Some key features of PIC24F08KM102-I/ML include 8 KB of flash memory, 512 bytes of RAM, and multiple communication interfaces.

  3. Can PIC24F08KM102-I/ML be used in battery-powered applications?
    - Yes, PIC24F08KM102-I/ML is suitable for battery-powered applications due to its low power consumption features.

  4. What development tools are available for programming PIC24F08KM102-I/ML?
    - Development tools such as MPLAB X IDE and MPLAB XC16 Compiler can be used for programming PIC24F08KM102-I/ML.

  5. Is PIC24F08KM102-I/ML suitable for motor control applications?
    - Yes, PIC24F08KM102-I/ML is well-suited for motor control applications due to its integrated peripherals and high-performance capabilities.

  6. Can PIC24F08KM102-I/ML communicate with other microcontrollers or devices?
    - Yes, PIC24F08KM102-I/ML supports various communication interfaces like SPI, I2C, and UART for seamless communication with other microcontrollers or devices.

  7. What are the temperature operating ranges for PIC24F08KM102-I/ML?
    - PIC24F08KM102-I/ML operates within a temperature range of -40°C to 125°C, making it suitable for a wide range of environments.

  8. Are there any application notes or reference designs available for PIC24F08KM102-I/ML?
    - Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC24F08KM102-I/ML in various technical solutions.

  9. Can PIC24F08KM102-I/ML be used in safety-critical applications?
    - PIC24F08KM102-I/ML is suitable for safety-critical applications as it offers features like hardware Cyclic Redundancy Check (CRC) and Flash Error Correction Code (ECC).

  10. What support resources are available for PIC24F08KM102-I/ML?
    - Microchip provides comprehensive technical support, including datasheets, user manuals, and online forums, to assist with the integration of PIC24F08KM102-I/ML into technical solutions.