MIC94061YC6-TR

Product Overview

Category

MIC94061YC6-TR belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management and control.

Characteristics

• Integrated circuit
• Power management and control functionality
• Small form factor
• High efficiency
• Low power consumption

Package

MIC94061YC6-TR is available in a compact 6-pin package.

Essence

The essence of this product lies in its ability to efficiently manage and control power in electronic devices, ensuring optimal performance and reliability.

Packaging/Quantity

MIC94061YC6-TR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 0.6V to VIN
• Maximum Continuous Output Current: 1A
• Quiescent Current: 35µA
• Switching Frequency: 1.2MHz
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

MIC94061YC6-TR features the following pin configuration:

1. VIN: Input voltage pin
2. GND: Ground pin
3. EN: Enable pin
4. FB: Feedback pin
5. SW: Switch pin
6. VOUT: Output voltage pin

Functional Features

• Wide input voltage range allows compatibility with various power sources.
• High efficiency enables efficient power conversion.
• Low quiescent current minimizes power consumption during standby mode.
• Fast transient response ensures stable output voltage under dynamic load conditions.
• Built-in protection features such as overcurrent and thermal shutdown enhance device safety and reliability.

Advantages and Disadvantages

Advantages

• Compact size facilitates integration into space-constrained designs.
• High efficiency leads to reduced power dissipation and longer battery life.
• Wide input voltage range enhances versatility and compatibility.
• Built-in protection features improve device reliability.

Disadvantages

• Limited maximum continuous output current may restrict usage in high-power applications.
• Higher cost compared to traditional linear regulators.

Working Principles

MIC94061YC6-TR operates as a step-down (buck) converter. It utilizes pulse width modulation (PWM) to regulate the output voltage based on the feedback received from the FB pin. The enable (EN) pin controls the device's on/off state, allowing for power management. The SW pin is responsible for switching the input voltage to the output side, while the VIN and GND pins provide the necessary power and ground connections.

Detailed Application Field Plans

MIC94061YC6-TR finds application in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

In these applications, it can be used for power management tasks such as voltage regulation, power conversion, and load control. Its small form factor, high efficiency, and integrated protection features make it suitable for use in compact and power-sensitive devices.

Detailed and Complete Alternative Models

1. MIC94060YC6-TR: Similar to MIC94061YC6-TR, but with a lower maximum continuous output current of 500mA.
2. MIC94062YC6-TR: Similar to MIC94061YC6-TR, but with a higher maximum continuous output current of 1.5A.
3. MIC94063YC6-TR: Similar to MIC94061YC6-TR, but with additional features such as adjustable output voltage and synchronization capability.

These alternative models offer different specifications and capabilities, allowing designers to choose the most suitable option based on their specific requirements.

Word count: 531 words