Microchip Technology
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MIC2076-2YM
Lihat Detail Lembar Data

MIC2076-2YM

Product Overview

Category

MIC2076-2YM belongs to the category of integrated circuits (ICs).

Use

This product is commonly used as a voltage regulator in electronic devices.

Characteristics

  • Voltage regulation capability
  • Compact package size
  • Low power consumption
  • High efficiency

Package

MIC2076-2YM is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of MIC2076-2YM lies in its ability to regulate and stabilize voltage levels within electronic circuits.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 16V
  • Output Voltage Range: 1.25V to 12V
  • Output Current: Up to 1.5A
  • Dropout Voltage: 0.5V (typical)
  • Quiescent Current: 120µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC2076-2YM features the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. EN: Enable pin for turning the device on/off
  5. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: MIC2076-2YM ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device includes built-in protection against excessive current flow.
  • Thermal shutdown: In case of overheating, the device automatically shuts down to prevent damage.
  • Enable/disable control: The EN pin allows users to turn the device on/off as needed.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Compact package size enables space-saving designs.
  • Wide input voltage range allows for versatile applications.
  • Overcurrent protection enhances device safety.

Disadvantages

  • Dropout voltage may cause a slight voltage drop across the regulator.
  • Limited output current capacity compared to higher-rated regulators.

Working Principles

MIC2076-2YM operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. By continuously monitoring and regulating the voltage, it ensures that the desired voltage level is maintained even when the input voltage varies.

Detailed Application Field Plans

MIC2076-2YM finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable audio players - Digital cameras - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC2076-2YM are: - LM317: Adjustable voltage regulator with a wide input voltage range. - LT1084: Low dropout voltage regulator capable of handling higher output currents. - LM7805: Fixed 5V voltage regulator commonly used in many electronic devices.

These alternative models can be considered based on specific requirements and design constraints.

Word count: 410 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MIC2076-2YM dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of MIC2076-2YM in technical solutions:

  1. Q: What is MIC2076-2YM? A: MIC2076-2YM is a dual synchronous buck regulator IC (integrated circuit) that provides high-efficiency power conversion for various applications.

  2. Q: What is the input voltage range of MIC2076-2YM? A: The input voltage range of MIC2076-2YM is typically between 4.5V and 26V.

  3. Q: What is the output voltage range of MIC2076-2YM? A: The output voltage range of MIC2076-2YM can be adjusted from 0.8V to 85% of the input voltage.

  4. Q: What is the maximum output current of MIC2076-2YM? A: MIC2076-2YM can deliver a maximum output current of up to 2A per channel.

  5. Q: Can MIC2076-2YM operate in a synchronous rectification mode? A: Yes, MIC2076-2YM supports synchronous rectification, which improves efficiency by reducing power losses.

  6. Q: Does MIC2076-2YM have built-in protection features? A: Yes, MIC2076-2YM includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  7. Q: What is the switching frequency of MIC2076-2YM? A: The switching frequency of MIC2076-2YM is typically set at 500kHz, but it can be adjusted using external components.

  8. Q: Can MIC2076-2YM be used in automotive applications? A: Yes, MIC2076-2YM is suitable for automotive applications as it meets the AEC-Q100 standard and has a wide operating temperature range.

  9. Q: What type of package does MIC2076-2YM come in? A: MIC2076-2YM is available in a compact 8-pin SOIC (Small Outline Integrated Circuit) package.

  10. Q: Are there any evaluation boards or reference designs available for MIC2076-2YM? A: Yes, Microchip provides evaluation boards and reference designs that can help users quickly prototype and implement MIC2076-2YM in their applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.