Lihat spesifikasi untuk detail produk.
AT49F512-55TI
Product Overview
Category
AT49F512-55TI belongs to the category of non-volatile memory devices.
Use
This product is primarily used for storing and retrieving data in electronic systems.
Characteristics
- Non-volatile: The AT49F512-55TI retains stored data even when power is removed.
- High capacity: It has a storage capacity of 512 kilobits (64 kilobytes).
- Fast access time: The device offers a fast access time of 55 nanoseconds.
- Low power consumption: It operates on low power, making it suitable for battery-powered devices.
Package
The AT49F512-55TI comes in a standard integrated circuit package.
Essence
The essence of this product lies in its ability to provide reliable and non-volatile data storage in various electronic applications.
Packaging/Quantity
The AT49F512-55TI is typically packaged in reels or trays, with a quantity of 250 units per reel/tray.
Specifications
- Memory Type: Flash
- Memory Size: 512 kilobits (64 kilobytes)
- Access Time: 55 nanoseconds
- Supply Voltage: 2.7V - 3.6V
- Operating Temperature Range: -40°C to +85°C
- Interface: Parallel
Detailed Pin Configuration
The AT49F512-55TI has a total of 32 pins, which are configured as follows:
- A0 - Address Input
- A1 - Address Input
- A2 - Address Input
- A3 - Address Input
- A4 - Address Input
- A5 - Address Input
- A6 - Address Input
- A7 - Address Input
- A8 - Address Input
- A9 - Address Input
- A10 - Address Input
- A11 - Address Input
- A12 - Address Input
- A13 - Address Input
- A14 - Address Input
- A15 - Address Input
- BYTE# - Byte/Word Selection Input
- WE# - Write Enable Input
- OE# - Output Enable Input
- CE# - Chip Enable Input
- VCC - Power Supply
- DQ0 - Data Input/Output
- DQ1 - Data Input/Output
- DQ2 - Data Input/Output
- DQ3 - Data Input/Output
- DQ4 - Data Input/Output
- DQ5 - Data Input/Output
- DQ6 - Data Input/Output
- DQ7 - Data Input/Output
- RY/BY# - Ready/Busy Output
- NC - No Connection
- GND - Ground
Functional Features
The AT49F512-55TI offers the following functional features:
- High-speed data transfer: The device allows for fast reading and writing of data.
- Sector erase capability: It supports sector-based erasure, enabling efficient memory management.
- Hardware and software protection: The product provides mechanisms to protect stored data from unauthorized access or modification.
- Low power consumption: The AT49F512-55TI operates on low power, making it suitable for battery-powered devices.
Advantages and Disadvantages
Advantages
- Non-volatile memory ensures data retention even during power loss.
- High storage capacity for various applications.
- Fast access time allows for quick data retrieval.
- Low power consumption prolongs battery life in portable devices.
Disadvantages
- Limited write endurance compared to other types of memory.
- Relatively higher cost per bit compared to some alternatives.
- Limited compatibility with certain interfaces or systems.
Working Principles
The AT49F512-55TI utilizes flash memory technology to store and retrieve data. It employs a combination of floating-gate transistors and charge storage mechanisms to achieve non-volatile data storage. The device uses an array of memory cells organized in sectors, allowing for efficient read, write, and erase operations.
Detailed Application Field Plans
The AT49F512-55TI finds applications in various electronic systems, including but not limited to:
- Embedded systems: Used for program storage in microcontrollers and microprocessors.
- Consumer electronics: Provides non-volatile storage for devices such as digital cameras, MP3 players, and set-top boxes.
- Automotive electronics: Used for storing firmware, configuration data, and other critical information in automotive systems.
- Industrial control systems: Enables reliable data storage in industrial automation and control applications.
- Communication devices: Utilized for firmware storage in routers, modems, and network switches.
Detailed and Complete Alternative Models
- AT49F1024-70TU: Offers double
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan AT49F512-55TI dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of AT49F512-55TI in technical solutions:
Q: What is the AT49F512-55TI? A: The AT49F512-55TI is a 512K (64K x 8) Flash memory device manufactured by Atmel.
Q: What is the operating voltage range for the AT49F512-55TI? A: The AT49F512-55TI operates within a voltage range of 4.5V to 5.5V.
Q: What is the maximum clock frequency supported by the AT49F512-55TI? A: The AT49F512-55TI supports a maximum clock frequency of 55 MHz.
Q: How much data can be stored in the AT49F512-55TI? A: The AT49F512-55TI has a storage capacity of 512 kilobits, which is equivalent to 64 kilobytes.
Q: What is the access time of the AT49F512-55TI? A: The AT49F512-55TI has an access time of 55 nanoseconds.
Q: Can the AT49F512-55TI be used for code execution? A: Yes, the AT49F512-55TI can be used for code execution as it is a non-volatile memory device.
Q: Is the AT49F512-55TI compatible with microcontrollers and other digital devices? A: Yes, the AT49F512-55TI is compatible with a wide range of microcontrollers and digital devices that support parallel Flash memory.
Q: Does the AT49F512-55TI support in-system programming (ISP)? A: No, the AT49F512-55TI does not support in-system programming. It requires a separate programmer for programming and erasing.
Q: What is the endurance of the AT49F512-55TI? A: The AT49F512-55TI has an endurance of at least 10,000 erase/write cycles.
Q: Can the AT49F512-55TI be used in automotive applications? A: Yes, the AT49F512-55TI is suitable for use in automotive applications as it meets the necessary temperature and reliability requirements.
Please note that these answers are based on general knowledge and may vary depending on specific application requirements.