Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
AT28C64X-20PC

AT28C64X-20PC

Product Overview

Category

AT28C64X-20PC belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This product is primarily used for non-volatile data storage in electronic devices. It allows for easy and efficient data retrieval even when power is turned off.

Characteristics

  • Non-volatile: Retains stored data even without power supply.
  • Electrically erasable: Allows for data modification without requiring physical removal.
  • Programmable: Can be written and rewritten multiple times.
  • High storage capacity: The AT28C64X-20PC has a storage capacity of 64 kilobits (8 kilobytes).

Package

The AT28C64X-20PC comes in a plastic package, which provides protection against environmental factors such as moisture and static electricity.

Essence

The essence of this product lies in its ability to store and retrieve data reliably, making it an essential component in various electronic devices.

Packaging/Quantity

The AT28C64X-20PC is typically packaged in tubes or trays, with each containing a specific quantity of chips. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Operating voltage: 5V
  • Access time: 200 nanoseconds
  • Organization: 8K x 8 bits
  • Interface: Parallel
  • Temperature range: -40°C to +85°C
  • Endurance: 1,000,000 write cycles
  • Data retention: 10 years

Detailed Pin Configuration

The AT28C64X-20PC has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. A0-A12: Address inputs
  2. CE: Chip enable
  3. OE: Output enable
  4. WE: Write enable
  5. I/O0-I/O7: Data input/output
  6. VCC: Power supply
  7. GND: Ground

Functional Features

  • High-speed operation: The AT28C64X-20PC offers fast access times, allowing for efficient data retrieval.
  • Low power consumption: This chip is designed to minimize power usage, making it suitable for battery-powered devices.
  • Easy integration: The parallel interface simplifies the integration of this product into existing electronic systems.

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data retention even during power loss.
  • Electrically erasable and programmable, enabling easy data modification.
  • High storage capacity meets the requirements of various applications.
  • Fast access times allow for quick data retrieval.

Disadvantages

  • Limited endurance: The number of write cycles is finite, which may be a limitation in certain applications.
  • Parallel interface may require additional circuitry for compatibility with modern systems.

Working Principles

The AT28C64X-20PC utilizes a combination of transistors and capacitors to store and retrieve data. When data is written, electrical charges are stored in specific memory cells, representing binary values. During read operations, these charges are detected and converted back into usable data.

Detailed Application Field Plans

The AT28C64X-20PC finds application in various fields, including but not limited to: 1. Consumer electronics: Used in devices such as digital cameras, smartphones, and gaming consoles for data storage purposes. 2. Automotive industry: Employed in vehicle control units and infotainment systems for storing critical data and firmware. 3. Industrial automation: Utilized in programmable logic controllers (PLCs) and industrial control systems for data storage and configuration.

Detailed and Complete Alternative Models

  1. AT28C64B-15PU: Similar to AT28C64X-20PC, but with a lower access time of 150 nanoseconds.
  2. AT28C256-15PC: Offers a higher storage capacity of 256 kilobits (32 kilobytes) while maintaining similar characteristics.

These alternative models provide options with varying specifications to cater to different application requirements.

In conclusion, the AT28C64X-20PC is an electrically erasable programmable read-only memory chip that offers non-volatile data storage, high-speed operation, and easy integration. While it has limitations in terms of endurance and interface compatibility, it serves as a reliable solution for data storage in various electronic devices across different industries.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan AT28C64X-20PC dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of AT28C64X-20PC in technical solutions:

  1. Q: What is the AT28C64X-20PC? A: The AT28C64X-20PC is a 64K (8K x 8) CMOS electrically erasable programmable read-only memory (EEPROM) chip.

  2. Q: What is the operating voltage range for the AT28C64X-20PC? A: The operating voltage range for this chip is typically between 4.5V and 5.5V.

  3. Q: How fast can the AT28C64X-20PC operate? A: The AT28C64X-20PC has a maximum access time of 200 nanoseconds (ns).

  4. Q: Can I use the AT28C64X-20PC in battery-powered devices? A: Yes, the low power consumption of this chip makes it suitable for battery-powered applications.

  5. Q: What is the storage capacity of the AT28C64X-20PC? A: The AT28C64X-20PC has a storage capacity of 64 kilobits (8 kilobytes).

  6. Q: Is the AT28C64X-20PC compatible with microcontrollers? A: Yes, this EEPROM chip can be easily interfaced with various microcontrollers using standard communication protocols.

  7. Q: Can I rewrite data on the AT28C64X-20PC multiple times? A: Yes, the AT28C64X-20PC supports multiple write cycles, allowing you to update or modify the stored data.

  8. Q: Does the AT28C64X-20PC require any external components for operation? A: No, this chip does not require any additional external components for its basic operation.

  9. Q: Can I use the AT28C64X-20PC in industrial temperature environments? A: Yes, the AT28C64X-20PC is designed to operate reliably in a wide temperature range, including industrial temperature conditions.

  10. Q: Are there any specific programming requirements for the AT28C64X-20PC? A: Yes, you need to follow the specified programming voltage and timing requirements mentioned in the datasheet for successful programming of this chip.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the official documentation and datasheet for accurate information.