AT25080A-10TU-1.8-T

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Non-volatile Serial EEPROM Memory
• Characteristics:
  • Low-power CMOS technology
  • High-speed operation
  • Wide voltage range
  • Small package size
• Package: 8-lead TSSOP (Thin Shrink Small Outline Package)
• Essence: AT25080A-10TU-1.8-T is a non-volatile memory IC used for storing and retrieving data in various electronic devices.
• Packaging/Quantity: Available in tape and reel packaging, with 2,000 units per reel.

Specifications

• Memory Size: 8,192 bits (1,024 bytes)
• Interface: Serial Peripheral Interface (SPI)
• Operating Voltage Range: 1.7V to 5.5V
• Operating Temperature Range: -40°C to +85°C
• Write Endurance: 1,000,000 cycles
• Data Retention: 100 years

Detailed Pin Configuration

The AT25080A-10TU-1.8-T IC has the following pin configuration:

| Pin Name | Function | |----------|----------| | CS | Chip Select | | SCK | Serial Clock | | SI | Serial Input | | SO | Serial Output | | WP | Write Protect | | VCC | Power Supply | | GND | Ground |

Functional Features

• Non-volatile memory: The AT25080A-10TU-1.8-T retains stored data even when power is removed.
• Serial interface: It uses the SPI protocol for communication with other devices.
• High-speed operation: Allows for fast read and write operations.
• Wide voltage range: Can operate within a broad range of supply voltages.
• Low-power consumption: Designed to minimize power usage.

Advantages and Disadvantages

Advantages: - Compact package size enables integration into space-constrained designs. - High-speed operation allows for efficient data transfer. - Wide voltage range ensures compatibility with various systems. - Low-power consumption prolongs battery life in portable devices.

Disadvantages: - Limited memory size may not be suitable for applications requiring larger storage capacity. - Lack of built-in security features may pose a risk in certain applications.

Working Principles

The AT25080A-10TU-1.8-T utilizes non-volatile EEPROM technology to store data. It communicates with the host device through the SPI interface, enabling read and write operations. The chip select (CS) pin is used to enable communication, while the serial clock (SCK) synchronizes data transfer. Data is transmitted via the serial input (SI) pin and received through the serial output (SO) pin. The write protect (WP) pin provides protection against accidental writes.

Detailed Application Field Plans

The AT25080A-10TU-1.8-T is widely used in various electronic devices that require non-volatile memory storage. Some common application fields include: - Consumer electronics: Used in smart TVs, set-top boxes, and audio/video equipment for storing configuration settings and user data. - Automotive: Employed in automotive electronics for storing critical data such as mileage, vehicle settings, and error codes. - Industrial automation: Utilized in industrial control systems for storing calibration data, configuration parameters, and event logs. - Medical devices: Integrated into medical equipment for storing patient data, device settings, and firmware updates.

Detailed and Complete Alternative Models

• AT25080A-10PU-2.7: Similar to AT25080A-10TU-1.8-T but packaged in an 8-lead PDIP (Plastic Dual In-Line Package).
• AT25080A-10TU-2.7-T: Same as AT25080A-10TU-1.8-T but operates within a voltage range of 2.7V to 5.5V.
• AT25080A-10SC-2.7: Surface-mount version with an SOIC (Small Outline Integrated Circuit) package.

(Note: The above alternative models are just examples and not an exhaustive list.)

This concludes the encyclopedia entry for AT25080A-10TU-1.8-T, providing comprehensive information about its product category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.