Microchip Technology
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
93AA66C-I/P
Lihat Detail Lembar Data

93AA66C-I/P

Product Overview

Category:

The 93AA66C-I/P belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use:

It is used for non-volatile data storage in various electronic devices such as microcontrollers, sensors, and communication modules.

Characteristics:

  • Non-volatile memory
  • Small form factor
  • Low power consumption
  • High reliability

Package:

The 93AA66C-I/P is available in an 8-pin DIP (Dual Inline Package) format.

Essence:

The essence of the 93AA66C-I/P lies in its ability to store and retain data without requiring a continuous power supply.

Packaging/Quantity:

Typically, the 93AA66C-I/P is packaged in tubes or reels with quantities varying based on manufacturer specifications.

Specifications

  • Memory Size: 4 Kbits
  • Interface: SPI (Serial Peripheral Interface)
  • Operating Voltage: 1.8V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

  1. Chip Select (/CS)
  2. Serial Data Input (DI)
  3. Serial Data Output (DO)
  4. Serial Clock (SCK)
  5. Write Enable (W)
  6. VSS (Ground)
  7. No Connection (NC)
  8. VCC (Power)

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • Power-Up/Down Protection
  • Sequential Read Operation

Advantages

  • Compact size
  • Low power consumption
  • High data retention
  • Wide operating voltage range

Disadvantages

  • Limited storage capacity
  • Slower write speeds compared to other memory technologies

Working Principles

The 93AA66C-I/P utilizes EEPROM technology, where data is stored by trapping electrical charges within a floating gate. This allows the chip to retain information even when the power is removed.

Detailed Application Field Plans

The 93AA66C-I/P finds applications in various fields including: - Automotive electronics - Industrial control systems - Consumer electronics - Medical devices - Communication equipment

Detailed and Complete Alternative Models

Some alternative models to the 93AA66C-I/P include: - 24AA64 - 25AA640 - AT24C04

In conclusion, the 93AA66C-I/P is a versatile EEPROM chip that offers reliable non-volatile data storage for a wide range of electronic applications.

Word Count: 368

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan 93AA66C-I/P dalam solusi teknis

  1. What is the operating voltage range of 93AA66C-I/P?
    - The operating voltage range of 93AA66C-I/P is 1.8V to 5.5V.

  2. What is the maximum clock frequency supported by 93AA66C-I/P?
    - The maximum clock frequency supported by 93AA66C-I/P is 3MHz.

  3. Can 93AA66C-I/P be used in automotive applications?
    - Yes, 93AA66C-I/P is suitable for automotive applications.

  4. What is the typical write cycle time for 93AA66C-I/P?
    - The typical write cycle time for 93AA66C-I/P is 5ms.

  5. Does 93AA66C-I/P support sequential read operation?
    - Yes, 93AA66C-I/P supports sequential read operation.

  6. What is the temperature range for 93AA66C-I/P?
    - The temperature range for 93AA66C-I/P is -40°C to +85°C.

  7. Can 93AA66C-I/P be used in industrial control systems?
    - Yes, 93AA66C-I/P is suitable for use in industrial control systems.

  8. What is the package type of 93AA66C-I/P?
    - 93AA66C-I/P is available in an 8-lead PDIP package.

  9. Is 93AA66C-I/P RoHS compliant?
    - Yes, 93AA66C-I/P is RoHS compliant.

  10. What is the maximum endurance of 93AA66C-I/P?
    - The maximum endurance of 93AA66C-I/P is 1,000,000 erase/write cycles.