Meixin Integrated
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MAX17005AETP+
Lihat Detail Lembar Data

MAX17005AETP+ - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuits (ICs)

Use: The MAX17005AETP+ is a highly efficient, low-quiescent current, step-up DC-DC converter. It is designed to provide a regulated output voltage from a single-cell Li-ion battery or other power sources.

Characteristics: - High efficiency conversion - Low quiescent current - Regulated output voltage - Compact package size - Wide input voltage range

Package: The MAX17005AETP+ is available in a small 20-pin TQFN package, making it suitable for space-constrained applications.

Essence: This IC serves as a power management solution, enabling efficient voltage conversion and regulation for various portable electronic devices.

Packaging/Quantity: The MAX17005AETP+ is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 3.3V to 5.5V
  • Maximum Output Current: 1.2A
  • Quiescent Current: 17µA (typical)
  • Switching Frequency: 1.2MHz (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX17005AETP+ features the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground reference pin
  3. SW: Switching node connection
  4. FB: Feedback voltage input pin
  5. EN: Enable control pin
  6. PG: Power good indicator pin
  7. VOUT: Output voltage pin
  8. AGND: Analog ground reference pin
  9. SS/TR: Soft-start/tracking control pin
  10. BST: Boost capacitor connection pin
  11. LX: Inductor connection pin 12-20. NC: No connect pins

Functional Features

  1. High Efficiency Conversion: The MAX17005AETP+ utilizes advanced switching techniques to achieve high efficiency, minimizing power losses during voltage conversion.

  2. Low Quiescent Current: With a low quiescent current of only 17µA, the IC ensures minimal power consumption when in standby or idle mode.

  3. Regulated Output Voltage: The device provides a stable and regulated output voltage, ensuring consistent performance of downstream components.

  4. Wide Input Voltage Range: The IC can operate with input voltages ranging from 2.7V to 5.5V, making it compatible with various power sources.

Advantages and Disadvantages

Advantages: - High efficiency conversion reduces power wastage - Low quiescent current minimizes standby power consumption - Regulated output voltage ensures stable operation of connected devices - Wide input voltage range enhances compatibility

Disadvantages: - Limited maximum output current (1.2A) - Requires external components for proper operation

Working Principles

The MAX17005AETP+ operates as a step-up DC-DC converter. It uses an internal switch to control the energy transfer from the input to the output. When the switch is closed, energy is stored in an inductor. When the switch opens, the energy is transferred to the output through a diode and the output capacitor. This process allows the IC to boost the input voltage to the desired output voltage level.

Detailed Application Field Plans

The MAX17005AETP+ finds applications in various portable electronic devices, including but not limited to: - Smartphones and tablets - Portable media players - Wearable devices - Wireless communication modules - Battery-powered IoT devices

Detailed and Complete Alternative Models

  1. MAX17006AETP+: Similar to the MAX17005AETP+, but with a higher maximum output current of 2A.
  2. MAX17007AETP+: Step-up DC-DC converter with integrated power switches for higher efficiency.
  3. MAX17008AETP+: Step-up/down DC-DC converter with adjustable output voltage.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 530 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MAX17005AETP+ dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of MAX17005AETP+ in technical solutions:

  1. Q: What is the MAX17005AETP+?
    A: The MAX17005AETP+ is a fuel gauge IC (Integrated Circuit) designed for accurately measuring the remaining capacity of a battery.

  2. Q: What type of batteries can the MAX17005AETP+ work with?
    A: The MAX17005AETP+ is compatible with single-cell lithium-ion (Li+) batteries.

  3. Q: How does the MAX17005AETP+ measure battery capacity?
    A: It uses a sophisticated algorithm that combines voltage, current, temperature, and other parameters to estimate the remaining capacity of the battery.

  4. Q: Can the MAX17005AETP+ be used in portable devices?
    A: Yes, the MAX17005AETP+ is commonly used in portable devices such as smartphones, tablets, wearables, and other battery-powered applications.

  5. Q: Does the MAX17005AETP+ require calibration?
    A: No, the MAX17005AETP+ is factory-calibrated and does not require additional calibration during normal operation.

  6. Q: Can the MAX17005AETP+ communicate with a microcontroller or host system?
    A: Yes, it supports I2C communication, allowing easy integration with microcontrollers or host systems.

  7. Q: What is the accuracy of the MAX17005AETP+?
    A: The MAX17005AETP+ has an accuracy of ±1% for most applications.

  8. Q: Can the MAX17005AETP+ monitor battery temperature?
    A: Yes, it includes a built-in temperature sensor for accurate temperature monitoring.

  9. Q: Does the MAX17005AETP+ have any additional features?
    A: Yes, it includes programmable alerts for low battery voltage, low capacity, and other conditions.

  10. Q: Is the MAX17005AETP+ available in different package options?
    A: Yes, the MAX17005AETP+ is available in a 16-pin TQFN package.

Please note that these answers are general and may vary depending on specific application requirements.