Meixin Integrated
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
LM4040DIX3-5.0+T
Lihat Detail Lembar Data

LM4040DIX3-5.0+T

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Reference

Characteristics: - Low dropout voltage - High accuracy - Low temperature coefficient - Small package size - Wide operating temperature range

Package: SOT-23

Essence: The LM4040DIX3-5.0+T is a precision voltage reference IC that provides a stable and accurate output voltage of 5.0V. It is commonly used in various electronic circuits where a precise voltage reference is required.

Packaging/Quantity: The LM4040DIX3-5.0+T is available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Output Voltage: 5.0V
  • Initial Accuracy: ±0.1%
  • Temperature Coefficient: 50ppm/°C
  • Dropout Voltage: 60mV
  • Operating Temperature Range: -40°C to +85°C
  • Supply Voltage Range: 2.7V to 10V
  • Quiescent Current: 60µA

Pin Configuration

The LM4040DIX3-5.0+T has three pins:

  1. VOUT: Output Voltage Pin
  2. GND: Ground Pin
  3. VIN: Input Voltage Pin

Functional Features

  • Precise and stable output voltage of 5.0V
  • Low dropout voltage allows for efficient operation
  • High accuracy ensures reliable performance
  • Low temperature coefficient minimizes voltage drift over temperature variations
  • Small package size enables space-saving designs
  • Wide operating temperature range makes it suitable for various environments

Advantages

  • Provides a highly accurate and stable voltage reference
  • Low dropout voltage reduces power dissipation
  • Compact package size allows for flexible integration in different applications
  • Wide operating temperature range ensures reliable performance in extreme conditions

Disadvantages

  • Limited output voltage options (only 5.0V)
  • Higher initial cost compared to less precise voltage references

Working Principles

The LM4040DIX3-5.0+T utilizes a bandgap reference circuit to generate a stable and accurate output voltage. It compensates for temperature variations by employing a proportional-to-absolute-temperature (PTAT) current source and a negative temperature coefficient (NTC) resistor. This design ensures that the output voltage remains constant over a wide temperature range.

Detailed Application Field Plans

The LM4040DIX3-5.0+T is widely used in various electronic systems and applications, including:

  1. Precision analog-to-digital converters (ADCs)
  2. Digital-to-analog converters (DACs)
  3. Voltage regulators
  4. Battery-powered devices
  5. Industrial control systems
  6. Test and measurement equipment
  7. Medical devices
  8. Automotive electronics

Detailed and Complete Alternative Models

  1. LM4040DIZ-5.0: Similar to LM4040DIX3-5.0+T but available in TO-92 package.
  2. LT1004CZ-5.0: Precision voltage reference with similar specifications and SOT-23 package.
  3. REF5025AIDGKT: High-precision voltage reference with 5.0V output and MSOP-10 package.

These alternative models offer similar functionality and can be considered as substitutes for the LM4040DIX3-5.0+T in various applications.

In conclusion, the LM4040DIX3-5.0+T is a precision voltage reference IC that provides a stable and accurate 5.0V output. Its low dropout voltage, high accuracy, and small package size make it suitable for a wide range of electronic applications. However, it has limited output voltage options and a higher initial cost compared to less precise alternatives.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan LM4040DIX3-5.0+T dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of LM4040DIX3-5.0+T in technical solutions:

  1. Question: What is the LM4040DIX3-5.0+T?
    Answer: The LM4040DIX3-5.0+T is a precision voltage reference IC that provides a stable 5.0V output.

  2. Question: What is the typical application of LM4040DIX3-5.0+T?
    Answer: It is commonly used as a voltage reference in various electronic circuits and systems.

  3. Question: What is the voltage accuracy of LM4040DIX3-5.0+T?
    Answer: The LM4040DIX3-5.0+T has a voltage accuracy of ±0.1%.

  4. Question: What is the temperature coefficient of LM4040DIX3-5.0+T?
    Answer: The temperature coefficient is typically 50 ppm/°C.

  5. Question: Can LM4040DIX3-5.0+T be used in battery-powered applications?
    Answer: Yes, it can be used in battery-powered applications as it has low quiescent current consumption.

  6. Question: What is the maximum operating voltage of LM4040DIX3-5.0+T?
    Answer: The maximum operating voltage is 20V.

  7. Question: Is LM4040DIX3-5.0+T suitable for high-precision measurements?
    Answer: Yes, it is suitable for high-precision measurements due to its low noise and excellent long-term stability.

  8. Question: Can LM4040DIX3-5.0+T withstand harsh environmental conditions?
    Answer: It has a wide operating temperature range of -40°C to +125°C, making it suitable for harsh environments.

  9. Question: What is the package type of LM4040DIX3-5.0+T?
    Answer: It comes in a SOT-23 package, which is small and easy to integrate into circuit designs.

  10. Question: Are there any application notes or reference designs available for LM4040DIX3-5.0+T?
    Answer: Yes, Texas Instruments provides application notes and reference designs that can help with the implementation of LM4040DIX3-5.0+T in various technical solutions.

Please note that these answers are general and may vary depending on specific requirements and use cases.