Linear Technology/QD Devices
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
LTC2913IMS-2#TRPBF
Lihat Detail Lembar Data

LTC2913IMS-2#TRPBF

Product Overview

Category

The LTC2913IMS-2#TRPBF belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for various applications, including power management and monitoring.

Characteristics

The LTC2913IMS-2#TRPBF has several key characteristics: - It is a low voltage supervisor with adjustable reset timeout. - It operates over a wide supply voltage range. - It offers precise voltage monitoring capabilities. - It provides a reset output signal upon detection of an out-of-range voltage condition.

Package

The LTC2913IMS-2#TRPBF is available in a small MSOP-10 package, which allows for easy integration into compact electronic designs.

Essence

The essence of this product lies in its ability to monitor and control voltage levels, ensuring the proper functioning and protection of electronic systems.

Packaging/Quantity

The LTC2913IMS-2#TRPBF is typically sold in reels or tubes, containing a specific quantity of units per package. The exact packaging and quantity may vary depending on the supplier.

Specifications

The specifications of the LTC2913IMS-2#TRPBF include:

  • Supply Voltage Range: 1.6V to 5.5V
  • Adjustable Reset Timeout Period: 1ms to 10s
  • Operating Temperature Range: -40°C to 85°C
  • Quiescent Current: 15µA (typical)
  • Reset Output: Active Low/Open Drain

Detailed Pin Configuration

The LTC2913IMS-2#TRPBF features the following pin configuration:

  1. GND: Ground
  2. RESET: Reset Output
  3. TH: Threshold Input
  4. MR: Manual Reset Input
  5. VCC: Supply Voltage
  6. GND: Ground
  7. GND: Ground
  8. GND: Ground
  9. GND: Ground
  10. VCC: Supply Voltage

Functional Features

The LTC2913IMS-2#TRPBF offers the following functional features:

  1. Voltage Monitoring: It continuously monitors the input voltage and compares it to a user-defined threshold.
  2. Reset Generation: Upon detection of an out-of-range voltage condition, it generates a reset output signal.
  3. Adjustable Timeout: The reset timeout period can be adjusted according to specific application requirements.
  4. Manual Reset: It provides a manual reset input for immediate system reset.

Advantages and Disadvantages

Advantages

  • Wide supply voltage range allows for compatibility with various systems.
  • Precise voltage monitoring ensures accurate detection of out-of-range conditions.
  • Adjustable reset timeout provides flexibility in system design.
  • Small package size enables integration into space-constrained applications.

Disadvantages

  • Limited availability of alternative models from different manufacturers.
  • May require additional external components for certain applications.

Working Principles

The LTC2913IMS-2#TRPBF operates based on the principle of voltage comparison. It continuously compares the input voltage with the user-defined threshold voltage. If the input voltage falls outside the acceptable range, the device generates a reset output signal. The reset timeout period can be adjusted to control the duration of the reset signal.

Detailed Application Field Plans

The LTC2913IMS-2#TRPBF finds applications in various fields, including but not limited to: - Power management systems - Battery-powered devices - Industrial automation - Automotive electronics - Consumer electronics

In power management systems, it can be used to monitor and control voltage levels, ensuring stable operation and protecting sensitive components from voltage fluctuations. In battery-powered devices, it helps prevent over-discharge or under-voltage conditions, prolonging battery life. In industrial automation and automotive electronics, it provides voltage monitoring for critical systems. In consumer electronics, it contributes to system reliability by detecting abnormal voltage conditions.

Detailed and Complete Alternative Models

While the LTC2913IMS-2#TRPBF is a reliable choice, there are alternative models available from different manufacturers that offer similar functionality. Some notable alternatives include:

  1. MAX823: Low Voltage Supervisor with Adjustable Reset Timeout
  2. ADM708: Microprocessor Supervisory Circuit with Adjustable Reset Timeout
  3. TPS3808: Precision Voltage Supervisor with Programmable Delay Time

These alternative models provide comparable features and can be considered based on specific application requirements.

In conclusion, the LTC2913IMS-2#TRPBF is a versatile integrated circuit used for voltage monitoring and control in various electronic applications. Its adjustable reset timeout, precise voltage monitoring, and small package size make it suitable for a wide range of systems. While it has some limitations, alternative models are available to meet specific needs.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan LTC2913IMS-2#TRPBF dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of LTC2913IMS-2#TRPBF:

  1. Q: What is LTC2913IMS-2#TRPBF? A: LTC2913IMS-2#TRPBF is a specific model number for a voltage supervisor IC manufactured by Linear Technology (now part of Analog Devices). It is used to monitor power supply voltages in various technical solutions.

  2. Q: What is the purpose of LTC2913IMS-2#TRPBF? A: The purpose of LTC2913IMS-2#TRPBF is to provide accurate monitoring and supervision of power supply voltages, ensuring proper operation and protection of electronic systems.

  3. Q: How does LTC2913IMS-2#TRPBF work? A: LTC2913IMS-2#TRPBF monitors the voltage levels of connected power supplies and generates an output signal when the voltage exceeds or falls below a predefined threshold. This signal can be used to trigger actions like system shutdown or fault detection.

  4. Q: What are the key features of LTC2913IMS-2#TRPBF? A: Some key features of LTC2913IMS-2#TRPBF include adjustable voltage thresholds, precise voltage monitoring, low quiescent current, wide operating temperature range, and small package size.

  5. Q: In which applications can LTC2913IMS-2#TRPBF be used? A: LTC2913IMS-2#TRPBF can be used in a wide range of applications such as industrial control systems, automotive electronics, telecommunications equipment, medical devices, and power management circuits.

  6. Q: Can LTC2913IMS-2#TRPBF handle multiple power supply inputs? A: Yes, LTC2913IMS-2#TRPBF can monitor multiple power supply inputs simultaneously. It has multiple voltage monitoring channels, allowing it to supervise different power sources.

  7. Q: What is the operating voltage range of LTC2913IMS-2#TRPBF? A: The operating voltage range of LTC2913IMS-2#TRPBF is typically between 1.5V and 6V, making it suitable for a wide range of power supply voltages.

  8. Q: Can LTC2913IMS-2#TRPBF be used in battery-powered applications? A: Yes, LTC2913IMS-2#TRPBF can be used in battery-powered applications. Its low quiescent current consumption makes it suitable for power-sensitive designs.

  9. Q: Does LTC2913IMS-2#TRPBF provide any fault detection features? A: Yes, LTC2913IMS-2#TRPBF provides fault detection features such as adjustable timeout periods and fault status indicators, which can be used to detect and respond to abnormal voltage conditions.

  10. Q: Where can I find more information about LTC2913IMS-2#TRPBF? A: You can find more detailed information about LTC2913IMS-2#TRPBF, including datasheets, application notes, and technical support, on the Analog Devices website or by contacting their customer support team.