Linear Technology/QD Devices
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
LTC2911HTS8-5#TRMPBF
Lihat Detail Lembar Data

LTC2911HTS8-5#TRMPBF

Product Overview

Category

The LTC2911HTS8-5#TRMPBF belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for various applications, including power management, signal conditioning, and control systems.

Characteristics

  • Low voltage operation
  • High accuracy
  • Wide temperature range
  • Small form factor
  • Low power consumption

Package

The LTC2911HTS8-5#TRMPBF is available in a TSOT-23 package, which is a small surface-mount package suitable for space-constrained applications.

Essence

The essence of LTC2911HTS8-5#TRMPBF lies in its ability to provide precise and reliable voltage monitoring and supervision functions.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Output Voltage: 5V
  • Accuracy: ±1.5%
  • Quiescent Current: 10µA (typical)

Detailed Pin Configuration

The LTC2911HTS8-5#TRMPBF has the following pin configuration:

  1. GND (Ground)
  2. IN (Input Voltage)
  3. SET (Threshold Setting)
  4. OUT (Output Voltage)
  5. FLT (Fault Indicator)

Functional Features

  • Precise voltage monitoring and supervision
  • Adjustable threshold setting
  • Fault indicator for easy system diagnosis
  • Low quiescent current for power efficiency
  • Wide operating temperature range for versatility

Advantages and Disadvantages

Advantages

  • High accuracy ensures reliable voltage monitoring
  • Small form factor allows for space-saving designs
  • Wide temperature range enables operation in various environments
  • Low power consumption prolongs battery life

Disadvantages

  • Limited output voltage options
  • May require additional components for certain applications

Working Principles

The LTC2911HTS8-5#TRMPBF operates by comparing the input voltage (IN) with the threshold voltage (SET). When the input voltage exceeds the set threshold, the output voltage (OUT) is activated and the fault indicator (FLT) is triggered. This allows for precise monitoring of voltage levels in electronic systems.

Detailed Application Field Plans

The LTC2911HTS8-5#TRMPBF finds extensive use in a wide range of applications, including:

  1. Battery-powered devices: Provides low voltage monitoring to prevent over-discharge and protect battery life.
  2. Power management systems: Enables accurate voltage supervision for efficient power distribution and protection against voltage fluctuations.
  3. Industrial control systems: Monitors voltage levels in critical equipment to ensure stable operation and prevent damage.
  4. Automotive electronics: Facilitates voltage monitoring in vehicle systems, enhancing safety and reliability.

Detailed and Complete Alternative Models

  1. LTC2910HTS8-5#TRMPBF: Similar to LTC2911HTS8-5#TRMPBF but with different pin configuration.
  2. LTC2912HTS8-5#TRMPBF: Offers additional features such as adjustable hysteresis and programmable delay.

These alternative models provide similar functionality and can be considered as substitutes depending on specific requirements.

Word count: 536 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan LTC2911HTS8-5#TRMPBF dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of LTC2911HTS8-5#TRMPBF in technical solutions:

Q1: What is LTC2911HTS8-5#TRMPBF? A1: LTC2911HTS8-5#TRMPBF is a specific model of a voltage supervisor IC (integrated circuit) manufactured by Linear Technology (now part of Analog Devices). It is designed to monitor the power supply voltage and provide reset signals to microcontrollers or other digital circuits.

Q2: What is the operating voltage range of LTC2911HTS8-5#TRMPBF? A2: The operating voltage range of LTC2911HTS8-5#TRMPBF is from 1.6V to 5.5V.

Q3: What is the purpose of using LTC2911HTS8-5#TRMPBF in a technical solution? A3: LTC2911HTS8-5#TRMPBF is used to ensure proper system operation by monitoring the power supply voltage and generating reset signals when the voltage falls below a specified threshold.

Q4: How does LTC2911HTS8-5#TRMPBF generate reset signals? A4: LTC2911HTS8-5#TRMPBF generates reset signals by pulling the RESET output pin low when the monitored voltage falls below the specified threshold.

Q5: Can LTC2911HTS8-5#TRMPBF be used with different microcontrollers or digital circuits? A5: Yes, LTC2911HTS8-5#TRMPBF can be used with various microcontrollers or digital circuits as long as their voltage requirements fall within the operating voltage range of the IC.

Q6: What is the typical reset threshold voltage of LTC2911HTS8-5#TRMPBF? A6: The typical reset threshold voltage of LTC2911HTS8-5#TRMPBF is 4.63V.

Q7: Can the reset threshold voltage be adjusted in LTC2911HTS8-5#TRMPBF? A7: No, the reset threshold voltage of LTC2911HTS8-5#TRMPBF is fixed and cannot be adjusted.

Q8: Does LTC2911HTS8-5#TRMPBF have any additional features? A8: Yes, LTC2911HTS8-5#TRMPBF includes a watchdog timer function that can be used to monitor the activity of the microcontroller or digital circuit.

Q9: What is the watchdog timeout period of LTC2911HTS8-5#TRMPBF? A9: The watchdog timeout period of LTC2911HTS8-5#TRMPBF is typically 150ms.

Q10: Is LTC2911HTS8-5#TRMPBF available in other package options? A10: Yes, LTC2911HTS8-5#TRMPBF is available in an 8-pin TSOT-23 package, but it may also be available in other package options depending on the manufacturer's offerings.

Please note that the answers provided here are general and may vary based on specific datasheet information and application requirements.