Linear Technology/QD Devices
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
LT1236ACN8-5#PBF
Lihat Detail Lembar Data

LT1236ACN8-5#PBF

Product Overview

Category

The LT1236ACN8-5#PBF belongs to the category of integrated circuits (ICs) and specifically falls under the voltage references category.

Use

This product is primarily used as a precision voltage reference in various electronic applications.

Characteristics

  • High accuracy: The LT1236ACN8-5#PBF offers exceptional accuracy with low temperature coefficient.
  • Low noise: It provides a stable and noise-free voltage reference signal.
  • Wide operating range: The device operates within a wide temperature range, making it suitable for diverse environments.
  • Low power consumption: The LT1236ACN8-5#PBF consumes minimal power, ensuring energy efficiency.

Package

The LT1236ACN8-5#PBF comes in an 8-pin plastic dual in-line package (PDIP).

Essence

The essence of this product lies in its ability to provide a precise and stable voltage reference, which is crucial for accurate operation of electronic circuits.

Packaging/Quantity

The LT1236ACN8-5#PBF is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Output Voltage: 5.000V ±0.05%
  • Temperature Coefficient: 10ppm/°C (maximum)
  • Supply Voltage Range: 2.7V to 36V
  • Operating Temperature Range: -40°C to 125°C
  • Output Current: 10mA (maximum)

Detailed Pin Configuration

  1. VOUT: Output Voltage
  2. GND: Ground
  3. NC: No Connection
  4. TRIM: Trim Pin (for adjusting output voltage)
  5. NC: No Connection
  6. NC: No Connection
  7. VIN: Input Voltage
  8. NC: No Connection

Functional Features

  • High precision voltage reference
  • Low temperature coefficient for accurate performance over a wide temperature range
  • Trim pin for fine-tuning the output voltage if required
  • Low power consumption for energy efficiency
  • Stable and noise-free output signal

Advantages and Disadvantages

Advantages

  • High accuracy and stability
  • Wide operating temperature range
  • Low power consumption
  • Noise-free output signal

Disadvantages

  • Limited output current capacity (10mA maximum)

Working Principles

The LT1236ACN8-5#PBF utilizes bandgap voltage reference technology to generate a precise and stable output voltage. It employs a combination of resistors, diodes, and amplifiers to achieve high accuracy and low temperature coefficient.

Detailed Application Field Plans

The LT1236ACN8-5#PBF finds applications in various fields, including: 1. Precision measurement instruments 2. Data acquisition systems 3. Industrial control systems 4. Medical equipment 5. Automotive electronics 6. Communication devices

Detailed and Complete Alternative Models

  1. LT1236BCN8-5#PBF

    • Similar specifications and features as LT1236ACN8-5#PBF
    • Different package: 8-pin plastic dual in-line package (PDIP)

  2. LT1236CCN8-5#PBF

    • Similar specifications and features as LT1236ACN8-5#PBF
    • Different package: 8-pin plastic dual in-line package (PDIP)

  3. LT1236DCN8-5#PBF

    • Similar specifications and features as LT1236ACN8-5#PBF
    • Different package: 8-pin plastic dual in-line package (PDIP)

These alternative models provide similar functionality and can be used as substitutes for the LT1236ACN8-5#PBF in various applications.

Word count: 455 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan LT1236ACN8-5#PBF dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of LT1236ACN8-5#PBF in technical solutions:

  1. Question: What is the LT1236ACN8-5#PBF?
    Answer: The LT1236ACN8-5#PBF is a precision voltage reference IC manufactured by Linear Technology (now part of Analog Devices). It provides a stable and accurate 5V output voltage.

  2. Question: What is the typical application of the LT1236ACN8-5#PBF?
    Answer: The LT1236ACN8-5#PBF is commonly used as a reference voltage source in various electronic systems, such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), power supplies, and temperature sensors.

  3. Question: What is the voltage accuracy of the LT1236ACN8-5#PBF?
    Answer: The LT1236ACN8-5#PBF has a voltage accuracy of ±0.05% over the specified temperature range.

  4. Question: What is the temperature coefficient of the LT1236ACN8-5#PBF?
    Answer: The LT1236ACN8-5#PBF has a temperature coefficient of 10ppm/°C, which means its output voltage changes by 10 parts per million for every degree Celsius change in temperature.

  5. Question: What is the operating temperature range of the LT1236ACN8-5#PBF?
    Answer: The LT1236ACN8-5#PBF can operate within a temperature range of -40°C to +85°C.

  6. Question: Can the LT1236ACN8-5#PBF be powered from a single supply voltage?
    Answer: Yes, the LT1236ACN8-5#PBF can be powered from a single supply voltage ranging from 7V to 40V.

  7. Question: Does the LT1236ACN8-5#PBF require any external components for operation?
    Answer: No, the LT1236ACN8-5#PBF is a complete voltage reference that does not require any external components.

  8. Question: What is the output current capability of the LT1236ACN8-5#PBF?
    Answer: The LT1236ACN8-5#PBF can source or sink up to 10mA of output current.

  9. Question: Is the LT1236ACN8-5#PBF available in different package options?
    Answer: Yes, the LT1236ACN8-5#PBF is available in an 8-pin PDIP (Plastic Dual In-Line Package) and other surface-mount packages.

  10. Question: Can the LT1236ACN8-5#PBF be used in battery-powered applications?
    Answer: Yes, the LT1236ACN8-5#PBF has low power consumption and can be used in battery-powered applications where precision voltage references are required.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.