EPCOS (TDK)
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
B72590D0150H060
Lihat Detail Lembar Data

B72590D0150H060

Product Overview

Category

The B72590D0150H060 belongs to the category of electronic components, specifically a ceramic capacitor.

Use

It is used for filtering and decoupling in various electronic circuits.

Characteristics

  • High capacitance
  • Low equivalent series resistance (ESR)
  • High reliability
  • Compact size

Package

The B72590D0150H060 is typically available in a surface mount package.

Essence

This capacitor is essential for stabilizing voltage and reducing noise in electronic circuits.

Packaging/Quantity

The B72590D0150H060 is usually packaged in reels or trays, with quantities varying based on manufacturer specifications.

Specifications

  • Capacitance: 15µF
  • Voltage Rating: 60V
  • Tolerance: ±20%
  • Temperature Coefficient: X7R

Detailed Pin Configuration

The B72590D0150H060 has two terminals for soldering onto the circuit board. The pin configuration is as follows: 1. Terminal 1: Positive (+) terminal 2. Terminal 2: Negative (-) terminal

Functional Features

  • High capacitance allows for effective filtering of noise.
  • Low ESR ensures minimal power loss and efficient energy transfer.
  • Stable performance across a wide temperature range due to the X7R temperature coefficient.

Advantages

  • High capacitance-to-size ratio
  • Reliable performance in diverse operating conditions
  • Suitable for compact electronic designs

Disadvantages

  • Relatively limited tolerance compared to some other capacitors
  • Higher cost compared to standard capacitors with lower capacitance

Working Principles

The B72590D0150H060 operates by storing and releasing electrical energy, effectively filtering out high-frequency noise and stabilizing voltage levels within the circuit.

Detailed Application Field Plans

The B72590D0150H060 is commonly used in: - Power supply units - Audio amplifiers - Signal processing circuits - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the B72590D0150H060 include: - B72590T0150K062: Similar capacitance and voltage rating, with a tighter tolerance - B72590D0100H060: Lower capacitance but suitable for applications with less stringent requirements - B72590D0150H070: Higher voltage rating for applications requiring increased voltage handling capacity

In conclusion, the B72590D0150H060 ceramic capacitor offers high capacitance and low ESR, making it an ideal choice for filtering and decoupling in various electronic circuits. Its compact size and reliable performance make it a valuable component in modern electronic designs.

[Word count: 366]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan B72590D0150H060 dalam solusi teknis

  1. What is the B72590D0150H060 component used for in technical solutions?

    • The B72590D0150H060 is a common mode choke used to suppress electromagnetic interference in electronic circuits.

  2. How does the B72590D0150H060 help in reducing electromagnetic interference?

    • The B72590D0150H060 acts as a filter, blocking unwanted high-frequency noise while allowing desired signals to pass through.

  3. What are the typical applications of the B72590D0150H060 in technical solutions?

    • The B72590D0150H060 is commonly used in power supplies, motor drives, and other electronic systems where EMI suppression is critical.

  4. What are the key specifications of the B72590D0150H060 that make it suitable for technical solutions?

    • The B72590D0150H060 typically has high impedance at the frequency range of interest, low DC resistance, and compact size for integration into various designs.

  5. Are there any specific design considerations when incorporating the B72590D0150H060 into a technical solution?

    • It's important to consider the placement and routing of the B72590D0150H060 to maximize its effectiveness in suppressing EMI and minimize interference with other components.

  6. Can the B72590D0150H060 be used in automotive electronics applications?

    • Yes, the B72590D0150H060 is suitable for automotive electronics, where EMI compliance is crucial for reliable operation.

  7. What are the temperature and current ratings of the B72590D0150H060?

    • The B72590D0150H060 typically has a wide temperature range and can handle moderate to high currents, depending on the specific model.

  8. Is the B72590D0150H060 RoHS compliant?

    • Yes, the B72590D0150H060 is generally RoHS compliant, making it suitable for environmentally conscious designs.

  9. Are there any recommended layout guidelines for using the B72590D0150H060 in PCB designs?

    • Manufacturers often provide layout recommendations to optimize the performance of the B72590D0150H060, including ground plane placement and signal routing.

  10. Where can I find detailed application notes or reference designs for integrating the B72590D0150H060 into my technical solution?

    • Many manufacturers offer application notes and reference designs to assist engineers in effectively utilizing the B72590D0150H060 in their designs.